Highlighting trees question

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
IMG_20170916_154717.jpg
 
  • Like
Reactions: Todd67
Welcome to the Forum;
Those 5 fin draft caps didn't exist in '75, more like a '77 or '78 with the newer spring handle as well.
That is the original color of door.
Do you have 12 inches clearance from the rear corners to wall? (excluding shield)
 
Hello new to this forum. I have a 77 or 78 Mama Bear stove and was wondering what kind of white paint are you using to paint the trees and Fisher script on the door?

To answer your original question Stove Bright is the paint recommended to use on your stove. Although the trees and lettering were not originally painted a different color many people do this to dress up the doors a little. Buy a can of spray in your choice of color, spray some out into a container and use a small brush.
http://forrestpaint.com/wp-content/uploads/2017/04/SBCC2017.pdf
 
I do have 12" clearance on each corner yes excluding the fireboard. When did they quit putting Pat Pending on the door?
Some foundries never did. It wasn't for the stove patent, it was due to other patents pending. (such as door latch, air controls, and other changes for new models) Here's a later model with both patent number and other patents pending;

Mama other patents pending door.JPG

And my favorite misspelled; PatenDed :)

Patended lefty door.jpg PatenDed Door $750 ebay WI.JPG
 
[QUOTE
And my favorite misspelled; PatenDed :)

View attachment 200365 View attachment 200366

How often,which models, and in what year range were these misspelled doors cast? Do you see them often?[/QUOTE]

Welcome to the forum! The misspelled "D" doors are rare. Coaly probably knows more about those doors than anyone, and might be one of a few forum members that actually have one. I've only seen them in pictures.
 
Hi, you'll gets lots of good Fisher info here.
For what it's entry-level I got some hi temp paint (VHT is the brand) in silver, to highlight some Papa Bear doors. Never did it, but that's what I -woulda- used. Small can of liquid. Keep a qtip and thinner handy. Good luck.
 
How often,which models, and in what year range were these misspelled doors cast? Do you see them often?

Welcome to the forum! The misspelled "D" doors are rare. Coaly probably knows more about those doors than anyone, and might be one of a few forum members that actually have one. I've only seen them in pictures.[/QUOTE]
Thank you Todd! I hope Coaley joins the conversation.My Baby Bear is one of those rarities.
 
  • Like
Reactions: Todd67