Room Blower Keeps Shutting Off

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
J

Jari

Member
Feb 11, 2016
7
Hurkett,Ont
I have a England Stove Works 55-TRPIP and seems just started this winter,my room blower shuts off often and for at least 15-20 mins at a time.. enough so that I'm having a hard time getting heat in my house..
I do the regular cleanings but is there something I'm missing? Where is the heat sensor and can it be cleaned or adjusted?
Any ideas would be great.
 
Here's a pic
 

Attachments

  • 20190102_100707.jpg
    20190102_100707.jpg
    151.6 KB · Views: 101
Sounds like the blower is getting hot and the thermal switch in the motor is shutting it down. Try taking the room blower out of the stove and use compressed air and blow the dust bunnies out of the motor and housing. Unplug the stove after it cools down to do this.
The heat sensor/ thermister is the fiberglass braded lines off the control board following them will lead you to the business end and the screw that holds it
 
Last edited:
  • Like
Reactions: Jari
Also, check the "bottom 3 buttons" and make sure the Air On Temperature was set to 1. My 25 PDV did the smae thing a couple of years ago and somehow it had been bumped up (don't remember to what). Setting it back to 1 and all was happy again.

Eric
 
ericofmaine said:
Also, check the "bottom 3 buttons" and make sure the Air On Temperature was set to 1. My 25 PDV did the smae thing a couple of years ago and somehow it had been bumped up (don't remember to what). Setting it back to 1 and all was happy again.

Eric
Click to expand...
2 Eric's from southern Maine. Must be an epedemic!
 
ericofmaine said:
Also, check the "bottom 3 buttons" and make sure the Air On Temperature was set to 1. My 25 PDV did the smae thing a couple of years ago and somehow it had been bumped up (don't remember to what). Setting it back to 1 and all was happy again.

Yeah, its still on 1

Eric
Click to expand...
 
You must log in or register to reply here.

Similar threads

Rickcross26
Imperial 25-IP/55-SHPIP/55-TRPIP
Replies
0
Views
396
The Pellet Mill - Pellet and Multifuel Stoves
Rickcross26
Rickcross26
B
Convection blower motor cleaning
Replies
7
Views
1K
The Pellet Mill - Pellet and Multifuel Stoves
Bigbrat
B
D
Stove Taking Forever to Shut Off
Replies
0
Views
300
The Pellet Mill - Pellet and Multifuel Stoves
DougFirSir
D
V
PP130 powers on and then shuts off
Replies
3
Views
254
The Pellet Mill - Pellet and Multifuel Stoves
ARC
ARC
D
Dell Point Europa 75
Replies
5
Views
971
The Pellet Mill - Pellet and Multifuel Stoves
ggkuda
G
Top Bottom
Back