Separate names with a comma.
Another pathway would be to use a pellet boiler or cord wood gasifier, heat a thermal storage with it, then go from the thermal storage via a...
can you post any pictures or dimensions?
My company was the US importer for the Walltherm from day one.
The units is not EPA certified and a such ca not be sold/installed any longer in the US
What you are trying to do is against physics.
These coils are designed so the aluminum fins suck the heat out of the copper pipe (that's what...
Windhager has a barometric damper with spring assisted explosion relief; see pictures
These are used in Europe on almost all gasification wood boilers
What is/are the reason(s) you want to install this thermal storage tank underground?
For pellet boilers you can search this site for Windhager BioWIN pellet boilers.
Lots of good stories...
Assume your average oil cost was around $1/Liter the last few years; that is $3.785/Gal
1 Gal of oil has 138,000 BTU's
For 1,000,000 BTU's this...
my understanding by talking to OpOp 2 years ago at a show in Germany is that the first Kedel-model boilers were some sort of an OEM or private...
New Horizons is actually also carrying Blackstar
Look for "heating cartridge" on McMasterCarr
You will need to make some sort of a housing for it that fits into your boiler; compression fittings...
In my opinion, any new house designed and build today, new from the ground up, hould not need much of a heating system
The technology and building...
"Invest" in technology from "1990" "for your new home" "without breaking the bank" ............ ???
Run, and don't look back, from this...
This is the link to the Renewable Heat NY rebate program
Bob, any possible recommendations for BTU meters here in the US?
Showroom model: Windhager BioWIN150 (52,000 BTU/hr) Pellet boiler - $6,495
There are no scratches or dents
Appliance has zero burn hours
I have a good amount of these 1" vermiculite boards
Let me know what size you need
The only difference between your pump group install and the picture is the valve in the bypass line.
This valve is there to adjust your resistance...
Location of pump group
Do you have "typical installation schematic" for this unit in combination with your low water temperature fan convectors to be hooked up with a...
Who is selling this Logstor pipe in the US?
My wood chips finally gave up on sticking togetter.
This started me thinking of drying them from the top, instead of blowing air from underneath....
Chip size "G50"
not to many long stings and preferably not to many fines
on average 3/4" chip size
you will need to dry them somewhat.
It is good to see that WoodMaster put some brain power into a "different" concept
I played around with catalytic designs myself for about 5...
Below some videos of the wood chips discharging system for the Windhager PuroWIN.
Caution; videos are boring to watch
It is AMAZING how these...
What do you want to accomplish with this reading?
Is it just to know how hot the flue gas is?
I would say as close as possible to the flue collar...
What is the reason that hot air furnaces need to meet 0.15 Lbs/mmBTU for each category burn, starting 2020?
Boilers need to meet 0.1 Lbs/mmBTU...
Still in the process of testing and certification, but 20 to 27K will most likely be the range for the 82,000 to 204,000 BTU/hr models
A peek into the gasification chamber via the top sight glass
Yes, the above videos are at 100% output
The PuroWIN can modulate down to 30%; see pictures below