Search results

  1. Biomass40

    Bio mass 40 not getting to temp

    I have some pallet wood i could try
  2. Biomass40

    Bio mass 40 not getting to temp

    Its clear, had to shut it down wouldnt get to temp. Temps are in the negatives had to switch to gas. Dont know what to do to fix it. Im stumped.
  3. Biomass40

    Bio mass 40 not getting to temp

    I do. Fire only gets going when door is open, other. Then smolders.
  4. Biomass40

    Bio mass 40 not getting to temp

    I have a biomass 40 and it will not get to temp it is set to, having trouble keeping a good flame it just smolders. Any ideas how i can fix this? New to this.
  5. Biomass40

    Fine Tuning BioMass

    Can't get biomass 40 to reach temp its set at? Any udeas why this is happening?
  6. Biomass40

    Fine Tuning BioMass

    Having trouble boiler wont reach temp it is set to.. get a flame for short time then smolders.any ideas what this could be?
  7. Biomass40

    Fine Tuning BioMass

    Is there any diagrams of the 40's airflow pathways?
  8. Biomass40

    Fine Tuning BioMass

    What do you mean by storage?
  9. Biomass40

    Fine Tuning BioMass

    Not sure of the heat loss in the house. I think im just wanting it to heat faster i guess. The heat is floor heat and it takes longer. Maybe im just being impatient. I appreciate all your help. Is that a Model M you have there. I have a 1950 Mt i restored.
  10. Biomass40

    Fine Tuning BioMass

    Thru the sight glass i see orange and blue.
  11. Biomass40

    Fine Tuning BioMass

    I dont think i have a sight glass, when house gets to temp it will go like in to a resting mode. And turn in and off as needed.
  12. Biomass40

    Fine Tuning BioMass

    Yes i clean the tubes , cause i was having smoke leak from door. That stopped. I cleaned the base where tubes are. Chimney is clear. And exhaust pipe is clean well.
  13. Biomass40

    Fine Tuning BioMass

    Ok i did that and still not getting a huge flame, its heating house but flames then it smolders. Flames up when i open door.
  14. Biomass40

    Fine Tuning BioMass

    Are there only the intake openings on the left side or both sides of firebox?
  15. Biomass40

    Fine Tuning BioMass

    The 2 holes behind that door?
  16. Biomass40

    Fine Tuning BioMass

    Ok so clean along that edge and find and clean out openings?
  17. Biomass40

    Fine Tuning BioMass

    Where are they located? Sorry im still new to this.
  18. Biomass40

    Fine Tuning BioMass

    Are you talking about in the bottom chamber along the sides? I cleaned them also.
  19. Biomass40

    Fine Tuning BioMass

    What intake openings inside the firebox? I did the ones behind blower in the front.
  20. Biomass40

    Fine Tuning BioMass

    Ok solved the smoke leaking from the front door by cleaning tubes. Now that temps have dropped in to low 20 and teens at night seems like i cant keep a roaring flame in boiler. Just smoldering at times.wood is seasoned. Any adjustments i can make? Worked well when temps were in low 30's. Thank you
  21. Biomass40

    Fine Tuning BioMass

    Well, i found my problem . I had to clean the tubes out. Did that and it has been fine. Thank you for your help
  22. Biomass40

    Help... leaking smoke

    My wood is dr Ok thank you im going to get tubes cleaned and hope that it fixes the problem. I appreciate all the help buddy. I will let u know after i get them cleaned if it helped.
  23. Biomass40

    Help... leaking smoke

    What is the paper test?
  24. Biomass40

    Help... leaking smoke

    There is build up in the tubes i pull out the inserts they were hard to get out so i think this might be the problem? Build up all on the sides. By cleaning these tubes should help?
  25. Biomass40

    Help... leaking smoke

    Have not adjusted hinges only latch. Leaks on the top and left side, only leaks when fan is on.
  26. Biomass40

    Fine Tuning BioMass

    Ok ill try adjusting the hindges, i shut it down cause of the leaking smoke and couldn't get it stopped and started cleaning tubes cause i thought that might have something to do with it.
  27. Biomass40

    Fine Tuning BioMass

    Ok i will try that, have you cleaned your tubes? If so what did you use?