Search results

  1. G

    SF3100

    I wasn't going to do it that way, but I thought it would be more efficient. What a waste!!
  2. G

    SF3100

    Here are some pictures. I also a HVAC hooked it up to my cold air return.
  3. G

    SF3100

    I was told that once I removed them from the tracks I would be able to pull them out diagonally through the door.
  4. G

    SF3100

    Just want to thank everyone who weighed in concerning my issues with my 4mth old Shelter 3100. I spent hours researching a stove that would work for my home. I thought I found it with this model. I am extremely disappointed with the problems I am having. However, they are paying to have the...
  5. G

    Shelter SF3100

    This model came with 3 factory pin settings. One for when the distribution fan kicks on, one for when it kicks off, and a safety pin for when it gets too hot.
  6. G

    Shelter SF3100

    No, it is not. The draft motor is still running due to the thermostat calling for heat but that's it. I did reset the pin settings which helped with a little longer burn times.
  7. G

    Shelter SF3100

    I do have an angle grinder, great idea, thanks. I questioned that once I replace these with the new ones what will guarantee it from happening again. I was told that the newer panels would not warp. This maybe due to the ceramic back which the older model did not have. I would still a very hot...
  8. G

    Shelter SF3100

    I need to remove both warped side panels, which they are going to replace. However, I'm not sure if that's feasible due the warpage.
  9. G

    Shelter SF3100

    I am not sure.
  10. G

    Shelter SF3100

    Here are 3 pictures of the fire box.
  11. G

    Shelter SF3100

    I thought I was missing something. I burned wood for the past 10 years with a hot blast always using the damper to adjust my fire. That is why I was confused with their explanation.
  12. G

    Shelter SF3100

    I never burn anything other than wood. Until yesterday the only wood that was burned in it was ash.
  13. G

    Shelter SF3100

    I have a thermometer on my chimney that never exceeds 350-400 degrees.
  14. G

    Shelter SF3100

    It was built in 2016. I bought it in August 2017.
  15. G

    Shelter SF3100

    I have extreme warping on both sides of the fire box. The door are slightly rounded at the corners.
  16. G

    Shelter SF3100

    I have a 4mth old SF3100. I developed 2 cracks at the top of door on each side. I was told to send pictures of my set up. Once received they saw that a manual damper was installed on my chimney. Thet said that these caused the stove to over heat, hence the cracks. However, in the manual it...