Search results

  1. G

    Settings on an American Harvest 6039

    The US Stove rep said that I need to make sure there is at least 3 ft of vertical exhaust pipe. If and when I get this thing running right, I will install it with 3 ft of vertical pipe, but I currently am just running a pipe horizontally out the door of my garage while I test the stove. Would...
  2. G

    Settings on an American Harvest 6039

    So, after a factory reset, the stove seemed to run steady on heat setting 5 (as mentioned above, I adjusted the auger to 9 and blower to 1). When I turned it up to 8, it was not able to feed the pellets fast enough, and the flame went out after about 15 mins. Setting 5 may be hot enough once I...
  3. G

    Settings on an American Harvest 6039

    The factory reset may have done the trick.I still have the auger turned up to 9 and the blower set at 1, and it is barely hanging on. It's been running for about 30-45 mins and the flame hasn't gone out. I have it running it on setting 5. I'm guessing the flames are typically small in these...
  4. G

    Settings on an American Harvest 6039

    I'll try the factory reset when I get home. Thanks... I'm crossing my fingers that will help.
  5. G

    Settings on an American Harvest 6039

    I didn't get a chance yet, but I'm almost certain it is 4 RPM.
  6. G

    Settings on an American Harvest 6039

    My pellets are just the regular kind I bought at Tractor Supply. They don't look too long, though I've only seen the kind I bought. The other board that came with the stove (the stove was bought at an auction, so there is no way to know the history behind it and how it worked before) looks as...
  7. G

    Settings on an American Harvest 6039

    Also, when I look at the 6039 manual, it is only calling for the connections that I have, the rectangular one and the "Vac" connections. It doesn't say or show anything about the thermostat wire
  8. G

    Settings on an American Harvest 6039

    It looks like there is a gold clip.
  9. G

    Settings on an American Harvest 6039

    Can I just use a piece of speaker wire? Where do I get the wire?
  10. G

    Settings on an American Harvest 6039

    I think my board(product #80496) is an older version of what you are showing (80507). My board just has the big rectangular connection connected and two "vac" wires connected. There are no other wires connected. When I turn up the auger to 9, it goes for about 7seconds (give or take) on heat...
  11. G

    Settings on an American Harvest 6039

    I don't see anything hooked up to the TSAT. When I tried messing with the A and B settings, I didn't really hear or see a difference in operation. But, maybe it's subtle, or I didn't wait long enough to see a difference. I have another control board I could try, though I'm not sure it's the...
  12. G

    Settings on an American Harvest 6039

    I'm crossing my fingers that someone might see this... this thread ended right where I need it to begin. I was just given a 6039 pellet stove and am trying to figure out how to get the most heat out of it. It does not have a manual draft lever under the burn pot. The outside air intake has a cap...