Search results

  1. B

    Installing a outside air kit

    Sweet that helps a ton! 2 last questions about your install the hole you made in your wall did you make sure there was a stud under the pipe? And second it looks like your pipe goes into your stoves face plate, yes? You didn’t have to buy a face plate?
  2. B

    Installing a outside air kit

    What do you mean by routing options? I was planning on making a hole through the wall behind it. i went on home depots website And saw snap-tite connecters but they all were small diameters. If its not a bother coupd you take pictures of that setup?
  3. B

    Installing a outside air kit

    Hi everyone I posted on here a while back. Everyone was awesome. I could use some help. I have an old quadrafire 2100 i’m trying to get into optimal conditions for winter. I live in a prefab home(mobile ish) and I’m not sure why one was never installed just moved several months ago. Could...
  4. B

    Outside air supply for Manufactured Home Installation

    I live in the high desert driving to vegas. During the winter it can get down to 10-20 degrees on the coldest days, and note normally 30 degrees Sent from my iPhone using Tapatalk
  5. B

    Outside air supply for Manufactured Home Installation

    Thanks guys, my project will be! - increasing the flue length - cleaning the inside of the stove/unclogging air inlets -buying seasoned wood now - creating air supply vent -painting the stove Sent from my iPhone using Tapatalk
  6. B

    Outside air supply for Manufactured Home Installation

    Thank you! Will do! Sent from my iPhone using Tapatalk
  7. B

    Outside air supply for Manufactured Home Installation

    I believe it is bent at a downward angle by design, not sagging. My prefab home is a bit over 1500 sq ft. Honestly would be happy if it heated half of this space. As far as height to the chimney cap, 3-4 ft from above the ceiling. I bought a mixed cord(Im unsure of quality), but will but quality...
  8. B

    Outside air supply for Manufactured Home Installation

    I apologize for it being dirty need to remove the ash. This is the shape it was in when I bought the home
  9. B

    Outside air supply for Manufactured Home Installation

    There is a sticker on the back with the specs. What would you define as “insides are shot”? I’m still very new to everything wood burning stoves. I tried using it this past winter, and it wouldn’t heat the living room it is in. Sent from my iPhone using Tapatalk
  10. B

    Outside air supply for Manufactured Home Installation

    Thank you so much for taking the time to reply. Would a kit like this be sufficient for installing the air supply? https://www.tractorsupply.com/tsc/product/us-stove-fresh-air-intake-kit-for-pellet-multi-fuel-stoves Sent from my iPhone using Tapatalk
  11. B

    Outside air supply for Manufactured Home Installation

    Hi all, I recently purchased an older Manufactured home and want to buy a new wood burning stove to replace the old one. I have done some research and found that since these homes tend to be air tight a secondary air supply is needed. Can anyone provide me with direction, videos or reading...