Hello, the start-up or ignition procedure listed in the P61 manual is not clear. Anybody knows how to start-up the P61 manually (without the ignitor).
Thank you very much.
Thank you very much.
Procedure - Manual start-up Harman P61 (2004)
- Thread starter Brune
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
- Status
What part is unclear?
Fill burn pot.
Fill Hopper.
Set feed rate to "3"
Turn Mode Selector to "Off" then to "Stove Temp"
Turn Temp Dial to "7"
Add starter gel to pellets in burn pot, stir & lit with a match.
After 30 - 45 minutes readjust feed rate if necessary.
Fill burn pot.
Fill Hopper.
Set feed rate to "3"
Turn Mode Selector to "Off" then to "Stove Temp"
Turn Temp Dial to "7"
Add starter gel to pellets in burn pot, stir & lit with a match.
After 30 - 45 minutes readjust feed rate if necessary.
- Status
Similar threads
