I’m going to be installing a older timberline (large single door) or Fisher(papa-bear), but need some help on the clearence distance to wall at the rear…
advise on install
- Thread starter stlawriverrat
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil. -
Super Cedar firestarters 30% discount Use code Hearth2024 Click here
- Status
FYI the manual for the Fisher stove can be found here.
https://www.hearth.com/econtent/index.php/wiki/File:fischermanual.pdf/
It shows proper clearances and required floor protection.
https://www.hearth.com/econtent/index.php/wiki/File:fischermanual.pdf/
It shows proper clearances and required floor protection.
Clearances can be reduced by using an NFPA wall shield as sanctioned in the Fisher manual. A proper wall shield should allow a clearance reduction of up to 66%.
- Status
Similar threads
