besides losing heat and burning up wood are there any drawbacks to burning with the doors open? does it make more creosote?
burning a vc vigilant as a fireplace?
- Thread starter racing01
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil. -
Super Cedar firestarters 30% discount Use code Hearth2024 Click here
- Status
I have VC Encore and have not had good luck with the fireplace method. If there is a good bed of coals the fire gets going to fast. If there isn't enough coals the fire doesn't burn well and things start to get cold. We have done it a few times, but it takes some work.
It is much less efficient, easy to over fire the stove, stove pipe temps might be lower due to all the cold air. I would guess creosote increases with the high volume of air and moisture.
But some times it is nice to look at...or make smores.
It is much less efficient, easy to over fire the stove, stove pipe temps might be lower due to all the cold air. I would guess creosote increases with the high volume of air and moisture.
But some times it is nice to look at...or make smores.
- Status
Similar threads
