The instructions don't say anything about sealer here. It says just put two screws in it? Seems like it would leak? However, I want to be able to disconnect the stove somewhat easily if I need to service/clean it.
Thanks
Thanks
Do I need RTV on this joint?
- Thread starter GrahamInVa
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
- Status
Yes.. High Temp RTV (silicone) on the stove adapter.. I used Pellet Vent Pro and that was the only area I used the High Temp..
smwilliamson
The Stove Guy
yes, put it inside the stainless collar of the adapter, a thin 1/4 inch bead and then set with one self tapping screw that you can get to with the rear service panel on.
- Status
Similar threads
