I have a Drolet Eco-35, I am getting a H-2 Error and cannot get it to go away, I need some help. I the place i bought it from is closed , and wont return till wensday.
Eco-35
- Thread starter DennisGibbons
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
- Status
don't have the info in front of me....but I assume you've tried reset. To clear errors codes,do a search for eco-45 or drolet here in the forum and you will get the procedure for resetting when the unit locks up that I posted. H-2 is a heat sensor isn't it? Was the unit too hot?
Update from Drolet or reset code for my ECO-45 stove.
The two button reset of the H1 is not working for me, so I talked to Anne at Drolet this morning and here is the reset that she game me.
Press the “Mode” button and release
Press the “+” button and release
Press the “-” button and release
Press the “quiet” button and hold for 3 to 5 seconds.
The stove will reset/or power off and all should be fine.
I will try this when I get home from work tonight smile
The two button reset of the H1 is not working for me, so I talked to Anne at Drolet this morning and here is the reset that she game me.
Press the “Mode” button and release
Press the “+” button and release
Press the “-” button and release
Press the “quiet” button and hold for 3 to 5 seconds.
The stove will reset/or power off and all should be fine.
I will try this when I get home from work tonight smile
- Status
Similar threads
