Flex connector Question

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.
Nov 5, 2010
163
North MS
I am not familar with the flex pipe for flues so my question is; will the flex pipe give .75 inches in a 16 or 18 inch span? I need to come out the back of the stove and go up . 75 inches into the flue. Will that pipe give that much and still fit as well as it needs to into the connectors on each end?
 
Depending on the stove, an adapter may be needed at the flue collar. My preference is to use rigid pipe for the horiz. section if at all possible, even if it means trimming a little bit off the upper edge for a tighter fit.
 
Status
Not open for further replies.