I have ordered a Mt. Vernon AE. I am in the process of ordering a corner stove board, but am unsure of the minimal requirements for this stove. I wanted to get a stove board which is 48" X 48". Is this enough space?
Mt. Vernon AE stove board
- Thread starter hughesma
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
- Status
jtp10181
Minister of Fire
I think it will work but I can't be certain without a bunch of math since they don't show the corner install very well in the manual.
http://www.quadrafire.com/Customer_Care/Installation_Manuals.asp
Easiest way to figure it out is to make a scale cardboard cutout and put it where you want. Then see if the hearth pad would work. You only need 6" in front of the glass covered.
http://www.quadrafire.com/Customer_Care/Installation_Manuals.asp
Easiest way to figure it out is to make a scale cardboard cutout and put it where you want. Then see if the hearth pad would work. You only need 6" in front of the glass covered.
- Status
Similar threads
