Hello everyone, I have tried all of the possible things i can find on youtube and still i can't get my pellet stove to feed pellets.
I have jumped 4 snap disks with a solid wire and replaced the thermocouple because the control board was blinking yellow. I have also replaced the control board.
As far as i can tell there is no power at the vacuum switch but there is power at snap disk 1. To test for power i attach one alligator clip to the jump wire and the other end of the volt meter to the body of the stove.
I have jumped 4 snap disks with a solid wire and replaced the thermocouple because the control board was blinking yellow. I have also replaced the control board.
As far as i can tell there is no power at the vacuum switch but there is power at snap disk 1. To test for power i attach one alligator clip to the jump wire and the other end of the volt meter to the body of the stove.
