Ravelli RV80 won't feed pellets after ignition

[MetsFan]

Hello!

My RV80 was working just fine, except for a smell of smoke while burning. Took the sides off, and found the leak was coming from the trap behind the stove and used RTV on it . Started it and all works normally (feeds pellets, ignites, correct flame, etc.) except now it won't feed pellets after that and eventually goes into a "no ignition" state.

Thoughts?

Thanks!

 

[MetsFan]

Just found the problem. Smoke probe popped out. The gasket is dried out and needs a new one.