I have a almost 2 year old TSC90 stove. This past January I replaced the control board (under warranty). It was showing a code (don't remember the one off hand). PelPro stated it was the board, and sent one out. After cleaning, and first fire I got nothing.. aside from exhaust fan turning. The one thing I noticed was instead of 12 minute start-up displayed, I'm now getting "22 minute" on the screen. PelPro mentioned that last time, and said it was the board based based on that. Anyone else had/seen the same thing?
BTW, I did jump the vacuum switch, and the stove lit with a lazy flame. It doesn't show any codes, but "failed ignition" and shut down. I'll be clean the exhaust fan and POF sensor as well.
BTW, I did jump the vacuum switch, and the stove lit with a lazy flame. It doesn't show any codes, but "failed ignition" and shut down. I'll be clean the exhaust fan and POF sensor as well.