We have not used our stove in 2yrs because the start switch broke we were told by a whitfield supplier that the stove is to old and the part is not available. what can we do to get the stove working?
whitfield pellet stove legend wp1
- Thread starter Ranee
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
- Status
The start switch is just a momentary toggle switch. You could take it out and by a momentary toggle switch at radio shack. It will look different than the original but it will work. That switch send a signal/voltage to a timer box. You might test the switch first to make sure its the switch and not the timer. Any one how has a volt/ ohm meter can do this for you. If the timer is bad, they are real hard to find. Email me if you need more info.
mark
mark
- Status
Similar threads
