Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Super Cedar firestarters 30% discount
Use code Hearth2024
Click here
This looks like good stuff and not too bad a price. Also take a look at the Bendaway Plus and Bendaway S in stainless at the bottom. Also not badly priced for 25 feet.
Yes and the stainless is good to 800 degrees for one type and 1650 degrees for the other. I noticed the price lists are dated 2011. I just sent them an email to see if those are still current or if they have a new price list.
Yes and the stainless is good to 800 degrees for one type and 1650 degrees for the other. I noticed the price lists are dated 2011. I just sent them an email to see if those are still current or if they have a new price list.
I purchased 25ft of 3" aluminum flex tube from Chimmeny Liner Pro for $38.63. My neighbor did not have O.A.
for her pellet stove. Installed it down the chimmney along the 4" SS vent pipe.
I bought a 6 foot long piece of automotive flex exhaust pipe from VIP Auto Parts for around 20 bucks. It's the only place I found a long piece. It was 2" ID which fit over the OAK connection on my stove perfectly. I only need about 4 feet. I have a 20 foot straight rigid 4" flue so I have the inlet damper closed down pretty far because it drafts pretty good.
Just found out from Harman that the 2-3/4" flex pipe they have for the PF100 OAK is stainless. I checked a local Harman dealer for the price of that part number and they said theirs was galvanized... A VERY EXPENSIVE galvanized at $6.99/ foot.!