Arrow wood stove model 1800A

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
  • Super Cedar firestarters 30% discount Use code Hearth2024 Click here
Status
Not open for further replies.

russreid

New Member
Dec 13, 2011
2
eastern washington
Hi I see this is the place to find a pdf manual for Arrow model 1800A. I am new to wood burning, I just purchased this stove used and need the manual to find my way around. Insidentally there is a crack in the face near the lower left hinge of the door. Can this be welded and function for many more years?? (I hope). I would really appreciate a manual (pdf) and any help anybody could give. Thank you,
 
russreid said:
Hi I see this is the place to find a pdf manual for Arrow model 1800A. I am new to wood burning, I just purchased this stove used and need the manual to find my way around. Insidentally there is a crack in the face near the lower left hinge of the door. Can this be welded and function for many more years?? (I hope). I would really appreciate a manual (pdf) and any help anybody could give. Thank you,


I did some searching and found this.

https://www.hearth.com/econtent/index.php/QA_Templates/info/777/


zap
 
I sent a PM to the OP. I need for he/she to send me an email address so that I can send the manual attachment.
 
Hi there,
I moved up to the wilds of Northern Cal to take care of my 90 y/o Dad and we have an Arrow 1800A. Can you please send me the manual? I'm at [email protected].

We do not seem to have the metal pieces that were spoken of.

The stove is about 25 years old. The bottom is kind of warped. My dad has never done any kind of maintenance on the stove. I took the two plates out and unclogged the holes, but they don't fit really well and the holes don't line up with the holes at the bottom of the stove. I am trying to talk my dad into getting a new stove.

Thanks for any help you can provide.
Helen
 
Drill a hole in the metal to stop it from cracking (if it is what I think it is).

I hope you didnt pay more than 50 bucks for an already cheap stove with cracks.

Maybe show us a photo of the damage?
 
Email and manual sent.
 
Would it be possible to get a copy of the manual? We have "inherited" one of these stoves..:)

Thank yous o much!

Carla
4yourfreedom AT gmail DOT com

Sent.
 
Hello, I would appreciate a copy of the manual too. I have one of these Arrow 1800a stoves that needs to be rebuilt.
Thanks, Mark
I'm at [email protected]

Check your email in a little while. It is large and takes a while to get there.
 
BrotherBart, Sorry to get inline on this but I too have just acquired an Arrow 1800a stove when I purchased my house last year. The stove works great but needs some parts (i.e. L.H. Liner, Rear Liner, Baffle Plate, Handle for door other than the metal piece that cooks flesh when hot, and new Rope Seal). All I can find is shops in Australia that service parts for this unit. Can you advise if there are any distributors in the US or parts available in the US ? I would too greatly appreciate a PDF manual if you could be so kind. Happy 2013 and thanks for the help.
 
On its way in your email.

Sounds like a parts list that if found would cost more than a new modern efficient stove. If the stuff is around these folks probably have it or know where it is.

www.woodmanspartsplus.com

 
Hi,
If you would be so kind as to send yet another copy of the manual for the Arrow 1800A woodstove, I would greatly appreciate it. We just bought one used (manufactured in 2009) and it seems to be rather finicky to start. My e-mail is [email protected].
Thank you so much!
 
Check your email in ten or so minutes.

I have just got to start charging for these things. ;lol
 
  • Like
Reactions: Heatsource
On the way.
 
Hi Can i Get inline for a copy of that manual for the 1800 seems this was a popular model i too picked up a used one and would like a copy of the manual before i start installation thank you in advance :)

[email protected]

kelly
 
Done. Sent to your registration email address.
 
Check your email in ten minutes or so.
 
Status
Not open for further replies.