The Blaze King Performance Thread

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.
rdust said:
muscamoot said:
Thanks again.

I'm searching.

PM jeff_t he can tell you about it. I think the place he bought from had two kings they wanted to move, he got a darn good deal on his. This was a while ago though so I'm not sure if they still have them available.

I think they only had two, and cowboy billy bought the other a few weeks ago. You can try though. It was Storey Stone in Jackson 517-782-4033
 
jeff_t said:
I think they only had two, and cowboy billy bought the other a few weeks ago. You can try though. It was Storey Stone in Jackson 517-782-4033

At least it went to another member!

muscamoot, from your screen name can I assume you're near St. Clair?
 
muscamoot said:
Yep, St. Clair.

Muscamoot bay is a good time.

Good deal, that's what I figured! When I was younger I spent a lot of time on the lake, not so much anymore. We have a pretty good Michigan following here, if you need anything just let us know! If you decide you may want to purchase one of these "ugly" Blaze King stoves and want to check one out in person let me know. I'm probably an hour or so from you.(between Romeo and Oxford)
 
I never said ugly. I said I like the looks of the Fireview.

Bought a new boat in the Spring. So gotta go to muscamoot now and then.

Your just down 32 mile rd a ways. I was brought up in Shelby.
 
It wasn't supposed to get very cold last night - just down into the mid-thirties. So around 7pm, right after supper, I just put four smallish splits in the bottom of the Princess.

After a bit it was going pretty good and I began dialing the t-stat back for the night.

Like many folks, we have one of those thermometers in the living room that displays the outside temperature (it reads from a remote sensor). My wife looked over at the gauge and remarked "it just got a degree warmer outside."

I didn't look up from my laptop, simply murmuring "yeah, I just put a couple pieces of wood in the Blaze King."
 
muscamoot said:
I never said ugly. I said I like the looks of the Fireview.

Bought a new boat in the Spring. So gotta go to muscamoot now and then.

Your just down 32 mile rd a ways. I was brought up in Shelby.

The ugly comment wasn't directed towards you, it's an ongoing joke/comment that is always made about the BK stoves by people on this site.

I grew up in Romeo and lived/rented in Shelby for a half dozen years or so. We looked in the Shelby/Utica area when we were house shopping but ended up back in more of a country setting.
 
I think the only non cat to kinda go head to head is the equinox .. that box is close to the king .. and should get long burn times but not 40hrs!
I am truly amazed at what the BK guys are reporting for burn times!
 
rdust said:
rdust said:
rdust said:
I loaded last night around 9 or 10 with a pretty much full load of silver maple. I just pulled the sides into the center about an hour ago and the stove top is around 340-350 with it set on 1.75, it's 12:25 right now). Honestly I don't think stove top temps show the whole picture since these stoves burn at such a steady temp but it's really all we have I guess. I'll be heading out tonight but tomorrow morning I'll load up and try to record as much data as I can for the burn.(if I can function :lol: )

It's now 3:00pm, stove top is 29x near the cat probe, just turned it up to 3.5 to warm the coals up so I can reload before going out. Hallway leading to the stove is 70* outside temp 38*. Roughly 17-18 hours since I loaded the stove with a stove temp still near 300*. :coolsmile:

Edit: Last one for me and I'm out for the night.

3:30 stove top back to 300 from burning down coals, loaded up with silver maple and some black walnut.

4:15 stove top hot spot 599, stove dial down to 1 fans off 36* according to accuweather.


Me again, just got in from last nights fun, moving a little slow but I'll make it.

Few minutes before 11am
Outside temp a mild 41*
Inside temp down to 67*(yikes!)
Stove top 230* after raking coals to the front(no meaningful heat for my house)
Loaded with chunks and uglies due to mild temps

Last load was 3:30pm yesterday, so nearly 20 hours between loads, probably had 17-18 hours of meaningful heat but unsure since I just got home.

Edit: added pics

It's just after 11pm and I loaded the stove with silver maple for the night I'm beat and couldn't wait any longer. The stove top was 330-340, temp in hallway leading to stove 70* outside temp 30* according to accuweather. We've had winds in the upper 20's all day and looks like it will continue for a while, lows are expected to be in the mid 20's.

I didn't do a good job of playing Jenga tonight so it's not a packed load but decent enough to allow me to sleep in on my last day off before going back to work. :)

An easy 12 hours on chunk wood makes me happy. :)
 
iceman said:
I think the only non cat to kinda go head to head is the equinox .. that box is close to the king .. and should get long burn times but not 40hrs!
I am truly amazed at what the BK guys are reporting for burn times!

Actually I measured the usable fire box of the Equinox and it came out to 3.1cu ft, nowhere near it's advertised 4cu ft. The Buck 94 non cat claims a fire box over 4cu ft but I've never seen one.
 
I've got nothing worth much to report today, my wife was "cold" this morning 69* in the hallway and loaded the stove on me with chunks/uglies. Serves me right for sleeping to 11 :lol: she was burning in the new load when I got up so last nights tossed in load went around 12 hours but she didn't rake it into the middle so it had more in it. I was planning on recording good data today but it still isn't cold enough to burn it hot, it's 26* right now and my wife has it cooking in here!(73* in hallway leading to stove) the stove is on 1.5, stove top in the 530* range. I don't mess with the pregnant lady so she can do as she like. :lol:

Tonight is supposed to get into the teens so hopefully I'll have something useful to report soon. I'm hoping I can burn this load down fast enough to reload at a reasonable hour tonight so I can reload easily before work in the morning.
 
rdust said:
Tonight is supposed to get into the teens so hopefully I'll have something useful to report soon.

Winds off the lake 10-25 mph, gusts to 35 and flirting with 0 here tonight. Seems as good a reason as any to have a decent fire instead of burning junk. That is 95 pounds of 3+ years since split that will easily go in the King.
 

Attachments

  • 010212 snack.jpg
    010212 snack.jpg
    115.3 KB · Views: 531
SolarAndWood said:
rdust said:
Tonight is supposed to get into the teens so hopefully I'll have something useful to report soon.

Winds off the lake 10-25 mph, gusts to 35 and flirting with 0 here tonight. Seems as good a reason as any to have a decent fire instead of burning junk. That is 95 pounds of 3+ years since split that will easily go in the King.

Man..that pic is some hot wood porn!
 
I'm in the same boat wind chills tonight with a stiff wind ZERO wind chills,this King better show me sumptin,no more little 30 degrees temps this is a taste of the real deal.All the King is gettin for dinner is white oak,3 splits and 3 shagbark hicks, and 3 bl splits take it or leave it, I better me lookin at 75 degrees tomorrow morning or he will be dethroned.
 
Guys be careful about the BK talk, before Penn gets jealous again and closes the thread!!!!! ;-)
 
ohlongarm said:
or he will be dethroned.

lol, I've got dibs right?
 
ohlongarm said:
I'm in the same boat wind chills tonight with a stiff wind ZERO wind chills,this King better show me sumptin,no more little 30 degrees temps this is a taste of the real deal.All the King is gettin for dinner is white oak,3 splits and 3 shagbark hicks, and 3 bl splits take it or leave it, I better me lookin at 75 degrees tomorrow morning or he will be dethroned.

N/S or E/W Loading????
 
Hiram Maxim said:
Guys be careful about the BK talk, before Penn gets jealous again and closes the thread!!!!! ;-)

Finger's getting itchy :coolsmile:

CloseThreadButton.jpg


J/K, at least the "BK dominates the world" stuff is happening in a BK thread.

Been enjoying it actually.

pen
 
grgrin.gif
 
8:00 pm
Stove top 260*
Loaded stove with 46.6 pounds of oak and silver maple(wife thinks I'm insane)
8:25 pm
Outside temp. 23* NW wind 14mph
Inside hallway temp 70*
Stove top 746*, t-stat just below the "n" in normal or just below "2", fans on low

Tonight is supposed to get to 14* with NW winds near 20 mph, we'll see how it goes, I'm not sure what t-stat setting I need to keep the heat up and get me through the night with enough heat since we haven't had many cold nights yet. I may have to experiment with the t-stat settings some in this weather to get my desired inside temp.

Edit: another layer of small splits would be possible if I'd take some ash out, it's an inch or so below the bricks so I have about 5 inches of ash in the bottom.
 
746 stove top!
I never seen more then 650 ..IR right below cat...wow!
 
HotCoals said:
746 stove top!
I never seen more then 650 ..IR right below cat...wow!

That was the hot spot, ranged anywhere from 650-750ish. I always burn it hot before turning it down, it seems to work for me. I never even pay attention usually, only doing it for this thread. I know it gets hot but Solar burns his HOT and hasn't melted it so I think I'm ok. :cheese:
 
rdust said:
HotCoals said:
746 stove top!
I never seen more then 650 ..IR right below cat...wow!

That was the hot spot, ranged anywhere from 650-750ish. I always burn it hot before turning it down, it seems to work for me. I never even pay attention usually, only doing it for this thread. I know it gets hot but Solar burns his HOT and hasn't melted it so I think I'm ok. :cheese:
I'm sure you're ok..I just can't get that temp..you sure you didn't put some of those after burner tubes in there??
 
Status
Not open for further replies.