Finally finished my block off plate and OAK!

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
  • Super Cedar firestarters 30% discount Use code Hearth2024 Click here
Status
Not open for further replies.
tpme06

tpme06

New Member
Sep 6, 2012
41
Newmarket, NH
I was able to get an OAK kit for my Harman Accentra insert so I installed it along with a block off plate this past week. Needless to say, my measurements weren't too bad with the exception of the holes for the exhaust and intake flex pipe. I used 4" pipe for the intake. Thank goodness for furnace cement to cover my mistakes :)
 

Attachments

  • Finally finished my block off plate and OAK!
    uploadfromtaptalk1379004976253.jpg
    51.8 KB · Views: 165
  • Finally finished my block off plate and OAK!
    uploadfromtaptalk1379004985091.jpg
    42.4 KB · Views: 162
  • Finally finished my block off plate and OAK!
    uploadfromtaptalk1379004995075.jpg
    46.5 KB · Views: 145
Looks like it'll work. You may kick yourself for not using the more flexible RTV Silicone,
as the furnace cement will eventually dry out & crack & chip, but that
shouldn't happen for a couple of years down the road...
 
Good point, something I wouldn't have thought of... I even had it with me when I did this, as that's what I used on the 3" pipe actually on the stove. Oh well.
 
Roxul fire proof rock wool insulation can be used on top of the blocking plate to keep the room a little warmer too.

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.
 
You will be happy you did it! I second the roxul! Stuffed mine solid before installing the bock off plate.
 
Status
Not open for further replies.

Similar threads

A
Installing Harman P42i-TC myself, have a few questions
Replies
3
Views
3K
The Pellet Mill - Pellet and Multifuel Stoves
azwillnj
A
Y
Lopi Large Flush Wood: my installation experience (including block-off plate).
Replies
6
Views
1K
Travis Industries: Lopi, Avalon, FPX
yuryk
Y
O
Best routing option for OAK on new install Harman P61
Replies
2
Views
1K
The Pellet Mill - Pellet and Multifuel Stoves
OnTheWay
O
Don2222
Replacing a Harman flame guide easy? Not on a PB105 when a top cover bolt head snaps!
Replies
3
Views
1K
The Pellet Mill - Pellet and Multifuel Stoves
Don2222
Don2222
J
Struggling On A New Stove Decision
Replies
6
Views
599
SBI: Century,Drolet,Osburn,Valcourt,Englander
Jway87
J
Top Bottom
Back