I have to admit I was nervous as heck. It was a groan getting it out. Didn't notice the two bolts on the side. Well in glad I put a empty pellet bag on the lower stove coving everything. When I went up the pipe with my 25 ft fiberglass rods and 4 inch brush. There was BUCKETS of ash falling!got all that. Then the fines box was all saw dust!cleaned that with my tube attachment. Last the esp fan. Turned the 3 screws and it was caked with ash. Used the tube to get all nooks. The used a clean paint brush to clean fan. Then clean the corners. Got it back on . Then cleaned left over dust.So it slid back in perfect . So knock on wood it's runnig and going . So I pray to god i did it right
Last edited: