Anyone have any input on this stove??? Thinking about this for my work shop in the garage
http://www.usstove.com/index.php?route=product/product&path=60&product_id=968
http://www.usstove.com/index.php?route=product/product&path=60&product_id=968
You can check out the stove on Amazon. window mount pellet stove model 2400, by US stove.
Local farm store has been trying to get rid off several of the earlier versions for around $800 for three years now.
Like I had posted earlier, Hope its not close in design to the window mount stove. I'll add, or materials as the earlier ones had bad pots. Maybe got a bunch of recalled Chevys in the metal. My car has five recalls but no partsTwo different units. The wall mounted one is a 4840. Its a stove that the rear of the unit does not get hot enough. so it makes it able to be wall mounted. It is required to be vented by a sidewall direct vent system.
Please read the following threads before considering your purchase ...
https://www.hearth.com/talk/threads...rd-fire-in-maryland-window-pellet-stov.84273/
Usually the only alteration of a pellet stove for workshop/garage use is 18" above the floor ( to avoid problems with fumes) but this may depend on local codes and by-laws. Check out requirements with your insurance company too.
Installed one for a person and the installation manual was not written very good. Call USSC and was told that they have no idea that there was three different install instructions on the same page and that the out line of the mount does not align with the piping. Was told to do it the best way possible and that I was the only one that called to complain about it. Did get it installed but basically you are on your own.Anyone have any input on this stove??? Thinking about this for my work shop in the garage
http://www.usstove.com/index.php?route=product/product&path=60&product_id=968
Look a long time before you waste your money on this. There is a similar model that fits in a window opening and in one word junk. I often wonder how much they pay someone to write a positive report on them.Anyone have any input on this stove??? Thinking about this for my work shop in the garage
http://www.usstove.com/index.php?route=product/product&path=60&product_id=968
Starting to sound like GM car. Will replace after the accidents. Got notice to fix but when tried to make appointment there was no parts from China.
Can the linkage be disconnected from under and slipped into neutral then loaded? That's what we use to do when we didn't have keys and towed a car. Just a thoughtOur Saab 9-3 has been stuck at the local railway station for more than a week after No.1 son lost the keys.
Impossible to hotwire so we have to wait until a new blank comes from Sweden so we can "break in" before loading it on a truck for the 70 mile trip to the only shop which can replace and reprogramme the computer and then get new keys. Should have just torched it.
We use essential cookies to make this site work, and optional cookies to enhance your experience.