Enviro Evolution Vibrating

mbella1026 · Feb 14, 2015

Hey Everyone

My Enviro Evolution is about 8 years old. This year I have had to replace the convection and combustion fans. Now every time I pull it out to give it a good cleaning after I put it back and fire it up i get a bad vibration when the convection fan is on. This was a very quiet stove. I have been wrestling with this problem for 2 months. Any advice would be appreciated..

SidecarFlip · Feb 14, 2015

Loose housing or no insulating washers between the motor and the fan housing?

johneh · Feb 14, 2015

Sounds like the fan blades are out of balance .
Pull the fan and check it . Bent ,loose or improperly installed
power the fan with it out to make sure that is what it is .
A missing or bent blade will cause a vibration . so will a loose blade
or if the fan is very dirty . repair as needed

mbella1026 · Feb 15, 2015

The motor is fine insulating washers are the same as the old motor. It only vibrates on higher levels. I am going to tighten the base/hearth pad and see what happens

mbella1026 · Feb 16, 2015

Update. I leveled the stove and vibration stopped. Thanks for the ideas.

johneh · Feb 16, 2015

So it wasn't so much a vibration more like the stove likes Rock and Roll

mbella1026 · Feb 16, 2015

That's correct.

Search

Search

Enviro Evolution Vibrating

mbella1026

Member

SidecarFlip

Minister of Fire

johneh

Minister of Fire

mbella1026

Member

mbella1026

Member

johneh

Minister of Fire

mbella1026

Member

Similar threads