Hello everyone. Just picked up a parlour 3000 on Craigslist. Had some issues.. Replaced brushes in motor , Cleaned it up, but my problem is with the T1 that was originally broken when i bought the stove so purchaced a T1 from Thelin came w brass compression fitting. Unfortunatly I cant seem to figure out how to install. The parts that came with the stove were in a bag along with broken T1 and other brass fittings. Going online to see examples of its assembly did not work out.. The brass compression fitting WILL NOT come off this new T1 i got. It will spin on the shaft but wont come off or go further in. None of my existing parts allow me to reassemble. I am missing something and I dont know what.
T1 Sensor
- Thread starter Zorch
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
- Status
Lake Girl
Moderator
Welcome to the forum ... think you are OK per the instructions
http://thelinco.com/wp-content/uplo...sor-in-the-Parlour-and-Gnome-Pellet-Stove.pdf
http://thelinco.com/wp-content/uplo...sor-in-the-Parlour-and-Gnome-Pellet-Stove.pdf
Lake Girl
Moderator
Return to Thelin and ask them to try again? Where did you get the part from? From what I understand, Thelin refers you to a dealer...
Thank you Don. That looks like the one i need .. They sent me the wrong one i guess..Hello
That is a strange looking T1 sensor you got there!
Here is the one I use.
It should do the trick.
See pic & click to Enlarge
hey LG thanks for the reply.. and for being the welcoming committee ...
ya know i did purchase direct from Thelin @ Laxhalt Dr in NV ...
i plan on calling them tomorrow and hopefully figure it out .. any ideas ???
Lake Girl
Moderator
Get an email address and send them a copy of the pics you sent us. Looks like they didn't send a complete assembly in the first place.
It looks like you have the correct T1 part, but the wrong brass nut-fitting was installed on it. You might have the correct fitting from the old parts, if not, you can buy that from Home Depot, along with a fresh compression ferrule. You need to pull the brass compression ferrule off the tube, pull off the wrong brass nut-fitting, and install the correct one so it looks like the picture of the new T1 (in the plastic bag).
Lake Girl
Moderator
It might sound crazy but that ferrule will not come off.. It will spin but wont go further in or off. even tried heating it up but it will not come off. crazy
Lake Girl
Moderator
WOW this thing is crazy cool.... first pellet stove and this thing is going to become a family member if i have anything to do with it...
what a score .... thanks to you all for your time on this issue of mine .. Ive got this thing dialed in... what a nice unit.
Thelin Parlor 3000 white w gold trim craigslist $350.00 couple inexpensive parts and shazam !! im trying to figure out how to turn the 1 1/2" air intake single line into headers.. im gonna trick this thing out.. hope your all doing real well .. cheers ....
what a score .... thanks to you all for your time on this issue of mine .. Ive got this thing dialed in... what a nice unit.
Thelin Parlor 3000 white w gold trim craigslist $350.00 couple inexpensive parts and shazam !! im trying to figure out how to turn the 1 1/2" air intake single line into headers.. im gonna trick this thing out.. hope your all doing real well .. cheers ....
I cannot get Thelinco to answer their phone. You were able though to get a part last week? I hope they stay in business, I like my parlour 3000
unclehuck
I hear ya there uncle.. I also was unable to get thru but yes I did order my T1 sensor from them and rec in a timely manner, excellent service.. but as for phone conver unable to break thru....
- Status
Similar threads
