Hope someone can help me with this problem. I have had some problems with the stove burning too hot, flame too high. I thoroughly took the pellets out of the hopper, made sure there was no blockage and totally took everything out of the stove itself and cleaned it really well. Now the problem seems to be the right side of the stove seems to be blowing cool air and the left side is hot on the convection blower.
Englander pdvc 25
- Thread starter tigerchef1969
- Start date
-
- Tags
- temperature uneven
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
- Status
Chrisnow86
Minister of Fire
Cedarjunki
Minister of Fire
Thanks for the reply ! No I haven't taken it out and cleaned the blower yes I've cleaned the exhaust
Chrisnow86
Minister of Fire
I would clean the blower the fins can fill up with ash and the stove won't draft as hard causing a lazy flame
Cedarjunki
Minister of Fire
Except a lazy flame from lack of oxygen isnt going to make the stove run hot. I am betting a change in pellets being short hotties or mis adjusted lower fuel/air settings...
But since the stove was just cleaned and now cooler air coming from the right side is why i say the impigement plate may be out of position.. but regardless the air from the right side will be cooler than the left.
But since the stove was just cleaned and now cooler air coming from the right side is why i say the impigement plate may be out of position.. but regardless the air from the right side will be cooler than the left.
Info on your set up would sure help us to help you. HOW LONG IS THE EXHAUST PIPING? DO YOU HAVE AN "OAK" ? HEAT RANGE NUMBER ? BLOWER SETTING NUMBER ? THE THREE BOTTOM NUMBERS ? Would be lots of help to every one here .
- Status
Similar threads
