Lesson in seasoning...

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
  • Super Cedar firestarters 30% discount Use code Hearth2024 Click here
Status
Not open for further replies.

CowboyAndy

New Member
Hearth Supporter
Feb 29, 2008
744
Chateaugay, NY
Well, I guess I am still learning! This being our first year burning has been interesting to say the least.

I have learned that:

even though it can have some good size cracks/checks, it can still be wet.

even though it doesn't have any noticable check/cracks, it can still be dry.


Seriously, I have some stuff that has been in direct sun/wind for a while, great color and checking and sizzled for a good 25 min. but I burned some stuff that has no visable cracks and lit instantly and burned awesome!


I don't think I'll ever understand this stuff!
 
Locust will not check.
Very small splits of most wood will be dry if ends are checked.
Big splits can still be wet in the center if the ends are checked.
You can't depend on checks!
You can depend on sounds. Should sound like baseball bats hit together when dry.
 
CowboyAndy said:
Well, I guess I am still learning! This being our first year burning has been interesting to say the least.

I have learned that:

even though it can have some good size cracks/checks, it can still be wet.

even though it doesn't have any noticable check/cracks, it can still be dry.


Seriously, I have some stuff that has been in direct sun/wind for a while, great color and checking and sizzled for a good 25 min. but I burned some stuff that has no visable cracks and lit instantly and burned awesome!


I don't think I'll ever understand this stuff!
"I don’t think I’ll ever understand this stuff! I think you already know now, going into next year you will have more time to prepare that will make all the difference!
 
Hang in there Andy. I've been burning wood for a bit longer (since youth and I'm drawing S.S.) than you....and I don't know squat! But you'll probably catch up to me before the end of the season. lol
 
gzecc said:
Locust will not check.
Very small splits of most wood will be dry if ends are checked.
Big splits can still be wet in the center if the ends are checked.
You can't depend on checks!
You can depend on sounds. Should sound like baseball bats hit together when dry.

Well, the stuff that is not cracked at all is Boxelder aka sh!t maple aka manitoba maple. Nice and light, burns great and not a single check mark on it!

smokinj said:
CowboyAndy said:
Well, I guess I am still learning! This being our first year burning has been interesting to say the least.

I have learned that:

even though it can have some good size cracks/checks, it can still be wet.

even though it doesn't have any noticable check/cracks, it can still be dry.


Seriously, I have some stuff that has been in direct sun/wind for a while, great color and checking and sizzled for a good 25 min. but I burned some stuff that has no visable cracks and lit instantly and burned awesome!


I don't think I'll ever understand this stuff!
"I don’t think I’ll ever understand this stuff! I think you already know now, going into next year you will have more time to prepare that will make all the difference!
Ya, I will be so much more prepared. I said to my wife last night that this is probably going to be the hardest year for us as we learn all there is to know about not only burning but cutting and storing the wood as well. I am doing alot of things different next year...


Backwoods Savage said:
Hang in there Andy. I've been burning wood for a bit longer (since youth and I'm drawing S.S.) than you....and I don't know squat! But you'll probably catch up to me before the end of the season. lol

There is so much to learn, isnt there!
 
CowboyAndy said:
gzecc said:
Locust will not check.
Very small splits of most wood will be dry if ends are checked.
Big splits can still be wet in the center if the ends are checked.
You can't depend on checks!
You can depend on sounds. Should sound like baseball bats hit together when dry.

Well, the stuff that is not cracked at all is Boxelder aka sh!t maple aka manitoba maple. Nice and light, burns great and not a single check mark on it!

smokinj said:
CowboyAndy said:
Well, I guess I am still learning! This being our first year burning has been interesting to say the least.

I have learned that:

even though it can have some good size cracks/checks, it can still be wet.

even though it doesn't have any noticable check/cracks, it can still be dry.


Seriously, I have some stuff that has been in direct sun/wind for a while, great color and checking and sizzled for a good 25 min. but I burned some stuff that has no visable cracks and lit instantly and burned awesome!


I don't think I'll ever understand this stuff!
"I don’t think I’ll ever understand this stuff! I think you already know now, going into next year you will have more time to prepare that will make all the difference!
Ya, I will be so much more prepared. I said to my wife last night that this is probably going to be the hardest year for us as we learn all there is to know about not only burning but cutting and storing the wood as well. I am doing alot of things different next year...


Backwoods Savage said:
Hang in there Andy. I've been burning wood for a bit longer (since youth and I'm drawing S.S.) than you....and I don't know squat! But you'll probably catch up to me before the end of the season. lol

There is so much to learn, isnt there!
well with running the furance there is.I have burnt wood for a long time but this is my second season with the furance its a differnt Beast all together!
 
CowboyAndy said:
Ya, I will be so much more prepared. I said to my wife last night that this is probably going to be the hardest year for us as we learn all there is to know about not only burning but cutting and storing the wood as well. I am doing alot of things different next year...
You're not alone buddy! I told my wife the exact same thing. The learning curve will start all over if I switch to a furnace with secondary burn like I am planning to in the next 5-10 years.
 
Well I 'm way short this year I have 2 cords maple split n stacked for next year . If I bring it in it drys fast
. Next year look out . I focused on the machine not the fuel . Cant wait till next year , I haved saved big all work , wet wood Last
Dec gas bill was 350.00 summer is 35.00 dec 53.00
 
Last winter was my first season burning wood in the stove. My wood was fairly dry, but it was all low BTU wood. I ran out before February.
This season I'm burning all hardwood and have a pretty good system going. I figured out what works for me...I think.
There are still some things I'll do different next year and probably the year after.
To me, you seem to be doing pretty darn good.
 
I've often heard / seen the checks referred to as "splitting cracks" as in the wood is easier to split, esp. w/ ax or maul, if you wait until it develops some splitting cracks. Around here (sunny so. calif.) we don't have the option of splitting wood when it's frozen (the rounds won't fit in the freezer). But wood will eventually dry here anyway, but certainly faster if split.

Peace,
- Sequoia
 
Well, evetything we have is split fairly soon after being cut. The biggest downfall is how long it has been seasoning... we just started cutting in june, managed to cut about 10 cords from june to october. Our single biggest mistake was where we stacked the first 1 1/2 cords... right at the end of a roof line (meaning the roof was pointing down towards the wood) so it got rained on and just totally soaked. I think what happened was that we went a few months without any major rain and the wood was really starting to dry then we got a month of solid rain and that just totally f-ed me. But, lesson learned. Everything is stacked in the open sun/wind.
 
Not to one up you, but I didn't even start cutting wood until late September/early October. I ended up chasing standing dead stuff and even some of that was still a little green. Live and learn I guess. This year I will start cutting in March/April and I have a nice open field that I can stack it in. Plenty of sun and wind, so I should not have any worries next year. Hopefully I can get a full year to two years ahead of the game now that I have a wood hauler and don't have to depend on others to lend me their equipment!
 
ikessky said:
Not to one up you, but I didn't even start cutting wood until late September/early October. I ended up chasing standing dead stuff and even some of that was still a little green. Live and learn I guess. This year I will start cutting in March/April and I have a nice open field that I can stack it in. Plenty of sun and wind, so I should not have any worries next year. Hopefully I can get a full year to two years ahead of the game now that I have a wood hauler and don't have to depend on others to lend me their equipment!

ikessky, you will do even better if you get your wood cut before March/April. If you can't cut it all up by then, at least fell the trees. Doing things this way leaves much less moisture that you have to evaporate before burning the wood.

That, sirs, is the biggest reason to cut your wood during the winter when things are dormant. Cut in March or April and the sap is going up already. Cut anywhere from November through February, or mid-February and there is less sap to contend with.

The only thing I'll cut come March is some soft maple and that is for deer food. After a hard winter, come March they are getting pretty hungry and they love soft maple. After cutting them, we'll usually leave them lay for several years which provides an excellent place for the deer to bed.
 
shaw24 said:
Ok what is "checking"? New to burning wood...haven't really started burning yet.
It's cracks created by the wood losing moisture. When you look at the end of a log, (cross section) the cracks you sometimes see are checking.
 
Backwoods Savage said:
ikessky, you will do even better if you get your wood cut before March/April. If you can't cut it all up by then, at least fell the trees. Doing things this way leaves much less moisture that you have to evaporate before burning the wood.
That, sirs, is the biggest reason to cut your wood during the winter when things are dormant. Cut in March or April and the sap is going up already. Cut anywhere from November through February, or mid-February and there is less sap to contend with.
The only thing I'll cut come March is some soft maple and that is for deer food. After a hard winter, come March they are getting pretty hungry and they love soft maple. After cutting them, we'll usually leave them lay for several years which provides an excellent place for the deer to bed.

I'm going to try to get as much felled as I can in the next few months. Hoping to get a few loads cut for my grandpa and dad also.
 
If you have any spare time, we need some cut too. lol
 
CowboyAndy said:
Well, I guess I am still learning! This being our first year burning has been interesting to say the least.

I have learned that:

even though it can have some good size cracks/checks, it can still be wet.

even though it doesn't have any noticable check/cracks, it can still be dry.


Seriously, I have some stuff that has been in direct sun/wind for a while, great color and checking and sizzled for a good 25 min. but I burned some stuff that has no visable cracks and lit instantly and burned awesome!


I don't think I'll ever understand this stuff!

It's simple. If it's been in your woodshed for a year, it's probably ok. If it's been two years, you're golden.
 
CowboyAndy said:
What if i dont have a woodshed? you mean to tell me that it will NEVER SEASON?!?!?!?!?!?!?
thats right and your furance will blow up!!!!! lol I built wood racks as close to my furance as i could and still being safe (holds one cord) there is a huge differnce in the wood after 48 hrs. but now i have it on a 10-14 days rotation in the rack before buring Klen dry baby!
 
Backwoods Savage said:
If you have any spare time, we need some cut too. lol
We'll see if I even get enough time to cut wood with them, let alone for them! I just feel bad because Dad has been talking about how he won't have enough to make it through the year and will have to use more propane. Grandpa, on the other hand, probably has enough wood for the year, but he's getting up there and I hate to think of him still breaking his back to get wood into the basement.
 
Getting wood into the basement has always been a chore because there are steps involved. Did it for years...figured the exercise was good for me. Drawing rocking chair money now and my wife wants to help so I remodeled a basement window near the stove. Hinged both windows and built a portable chute that telescopes. The wife gets her kicks chucking wood into the chute and I can keep up with the stacking.
 
^That sounds very efficient Jack...I take it she loads the wheelbarrow too? My Dad always said many hand make light work.
 
Savageactor7

No wheelbarrow involved. Take the ATV and trailer to the woodshed, load up high and tight, park the load near the window, insert the chute and the wife and I commence unloading
 
ikessky said:
Backwoods Savage said:
If you have any spare time, we need some cut too. lol
We'll see if I even get enough time to cut wood with them, let alone for them! I just feel bad because Dad has been talking about how he won't have enough to make it through the year and will have to use more propane. Grandpa, on the other hand, probably has enough wood for the year, but he's getting up there and I hate to think of him still breaking his back to get wood into the basement.

Not to beat up on you ikessky, but make the time. Get out and help your grandpa get the wood in. You SHOULD hate the idea of him breaking his back to get wood into the basement. This year I started cutting and stacking for me and my dad. It's fulfilling to help him get the wood in and it keeps me involved in his life. Work will always be there, but older family members die off. When they go you don't want to be sitting there knowing that you could have helped them but were just too caught up in your life to take care of them like they did for you when you were growing up. I'm not saying really making this post about you, but what you posted brought up one of my pet peeves of our society. Abandonment of our elders so we can dique around with stuff to keep us busy instead of spending time helping them. Seriously... take off a Saturday and go load up grandpa's basement for him. He'll greatly appreciate it.
 
Status
Not open for further replies.