Tandem Trailer Load of Split Wood, how to confirm cord count before delivery?

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
  • Super Cedar firestarters 30% discount Use code Hearth2024 Click here
Status
Not open for further replies.

Xanabri

New Member
Hearth Supporter
Jan 18, 2010
13
Iowa, USA
Here's the dilemma. We're starting to buy cord wood for the 2012/2013 heating season. We've purchased split wood from a variety of sources over the last few years (most were one shot guys picking up a few extra dollars) with prices as low as $150/ cord delivered and stacked (really closer to 3/4 cord) to as high as $205/ cord delivered and stacked. Last year we found some great red oak for $150/ cord dumped, which is now in storage. Yesterday, I read an advert on Craigslist for one tandem trailer load $600 cash delivered and dumped. The advert claims "about 4 cords of split oak and mixed hardwoods". I'm not sure how to pre-qualify the wood volume or quality before delivery and I’m not sure waiting for pure oak isn't a better option. We live on a small farm so we have almost unlimited storage space, but our budget is always a consideration. Any suggestions would be appreciated.
 
Find out the volume of the trailer in cubic feet.

L x W x D = Cubic feet

180 cubic feet loose thrown = 1 cord (128 cubic feet stacked)
 
peterc38 said:
180 cubic feet loose thrown = 1 cord (128 cubic feet stacked)
Somewhere between 180 and 200 cu ft for a bulk loaded cord is the generally accepted number.

The mix of species could be a bigger factor in total BTU.
 
Tandem trailers come in many sizes. Hardwood comes in many species. Wood can be just thrown into a trailer or stacked. Which is this? So the only thing you really have to go on is what the guy is telling you. I would probably tend to think his "about 4 cords" is a bit off. Definitely I'd ask more questions and even if possible pay him a visit. You might even ask for references.
 
Just remember that "about 4 cords of split oak and mixed hardwoods” will weigh at least 10,000 lbs. That must be one pretty butch trailer he's got there. Four cords stacked would be 16 feet long, 8 feet wide, and stacked 4 feet high. Thrown would be MUCH bigger. I'd ask to at least see the trailer. I bet it is closer to 2 cords.
 
Flatbedford said:
Just remember that "about 4 cords of split oak and mixed hardwoods” will weigh at least 10,000 lbs. That must be one pretty butch trailer he's got there. Four cords stacked would be 16 feet long, 8 feet wide, and stacked 4 feet high. Thrown would be MUCH bigger. I'd ask to at least see the trailer. I bet it is closer to 2 cords.

+1

I have a 15'x5'x2' tandem trailer and no way could I get 4 cords on it I can get two if stacked 3.5 high.
A common landscape trailer size is 16x6xX sides (7000lb)so if it was Stacked tight 4' high it could hold 3 cord max. but it would be real close to max weight . The same size in a heavy equipment type trailer might be 10,000 or 14,000 lbs
Maybe he has one of those 16 x6 x6 dump trailers that would hold a bit over 4 stacked (thrown in about 3.2)
.
 
Status
Not open for further replies.