Glo King Pellet Stove info

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.

turbotech

Feeling the Heat
Dec 2, 2010
278
NE
Anyone have the manual for the Glo King P75 and P100 pellet stove. I am looking for the btu-hr outputs. I found they went out of business so a manual is hard to find. Where these stoves any good? Are they 40,000 btu/hr stoves? How many lbs of pellets in the hopper?
 
maybe try a google search for the stove model manual.
 
titanracer said:
maybe try a google search for the stove model manual.

I tried that and it came up with nothing. The smartest pellet stove folks seem to chat here so it seemed like the best place to ask.
 
SmokeyTheBear said:
Very little on the web but if you can contact the poster of this http://www.jlaforums.com/viewtopic....kvHfCA&usg=AFQjCNFOAVSD6y7XGU0V_6w2LGcQuLB9qQ you may have a crack at both a stove and manual.

I will give it a try. The one I saw is a P100 and it is clean but has a bad blower motor. She wants $380 for it as is. My gut feeling is to just walk away, but I will go for it if the BTU/HR is high at max setting. I tried the Pierce Engineering phone number but that number isn't valid anymore and gives the operator.
 
turbotech said:
SmokeyTheBear said:
Very little on the web but if you can contact the poster of this http://www.jlaforums.com/viewtopic....kvHfCA&usg=AFQjCNFOAVSD6y7XGU0V_6w2LGcQuLB9qQ you may have a crack at both a stove and manual.

I will give it a try. The one I saw is a P100 and it is clean but has a bad blower motor. She wants $380 for it as is. My gut feeling is to just walk away, but I will go for it if the BTU/HR is high at max setting. I tried the Pierce Engineering phone number but that number isn't valid anymore and gives the operator.

Good luck.
 
SmokeyTheBear said:
turbotech said:
SmokeyTheBear said:
Very little on the web but if you can contact the poster of this http://www.jlaforums.com/viewtopic....kvHfCA&usg=AFQjCNFOAVSD6y7XGU0V_6w2LGcQuLB9qQ you may have a crack at both a stove and manual.

I will give it a try. The one I saw is a P100 and it is clean but has a bad blower motor. She wants $380 for it as is. My gut feeling is to just walk away, but I will go for it if the BTU/HR is high at max setting. I tried the Pierce Engineering phone number but that number isn't valid anymore and gives the operator.

Good luck.

Thank you. I have a feeling I am going to need it on this one. I don't know why but when ever I see old junk that looks hard to find info on, or hard to find parts, etc then I just have to go for it. I know I should just walk away.
 
Status
Not open for further replies.