064/066 help needed

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.
southbound

southbound

Minister of Fire
May 26, 2008
733
mid south tn
New problem and need help please..

I am building another 064 from a crank case I had left over from the last build..

I need a coil for this 064 build and I have been looking on the bay.. I noticed that coils listed for the 064 can be used on other models..

A sample list I pulled off the bay.. 024, 026, 028, 029, 039, 034, 036, 038, 044, 048, 064, ms240, ms260, ms290, ms310, ms390, ms340, ms360, ms380, ms381, ms440, ms640

So this caused me to go grab a 034 coil I have laying around and it does not fit... So my question is if this is a late model 064 with 066 head bolt specs is it possible that I need a 066 coil..

Now I do not have a ipl for the 066 so I am assuming that the coil from a 064 and 066 are different...


Here is the part number for the case half.. 9 1122 021 0700

Any info would be great thanks....
 

Attachments

  • 11202011109.jpg
    11202011109.jpg
    56.7 KB · Views: 568
I'm not adverse enough to say on Stihls but look for Brad Snelling on the arboristsite. He will know for sure or I can give you his # in a PM.
 
Went out to the shop and tore down my 064/066

It has different holes for the coil so I tried the 034 coil.. Bolted right up and the saw runs fine...

I take the coil from that saw which is much larger in the house and it bolts right up on this case half.. So I am still on track...
 

Attachments

  • 11202011111.jpg
    11202011111.jpg
    39.7 KB · Views: 448
Sorry they were so slow but glad you found a solution.
 
No ones fault this one is funny...

Part numbers run it as a 064 but the head bolt pattern and now the coil have it as a 066????????????????????????????????????
 
southbound said:
No ones fault this one is funny...

Part numbers run it as a 064 but the head bolt pattern and now the coil have it as a 066????????????????????????????????????
Click to expand...

lol, If you got it try it.....
 
sorry from 024

024, 026, 028, 029, 039, 034, 036, 038, 044, 048, 064, ms240, ms260, ms290, ms310, ms390, ms340, ms360, ms380, ms381, ms440, ms640
 
southbound said:
sorry from 024

024, 026, 028, 029, 039, 034, 036, 038, 044, 048, 064, ms240, ms260, ms290, ms310, ms390, ms340, ms360, ms380, ms381, ms440, ms640
Click to expand...

Guess the big boys are not on there..
 
smokinjay said:
southbound said:
sorry from 024

024, 026, 028, 029, 039, 034, 036, 038, 044, 048, 064, ms240, ms260, ms290, ms310, ms390, ms340, ms360, ms380, ms381, ms440, ms640
Click to expand...

Guess the big boys are not on there..
Click to expand...

I know I'm just a wanna be.. See the tear falling???

Someday when the time is right I will have one of the big boys!!

Hey on another note my boss has a yellow john deer chainsaw in the corner... I want it so bad.. They tell me it does not run good so the tried a new plug... I looked at it and said nothing... It has 2 plugs!!! I am gonna try and buy it...
 
southbound said:
smokinjay said:
southbound said:
sorry from 024

024, 026, 028, 029, 039, 034, 036, 038, 044, 048, 064, ms240, ms260, ms290, ms310, ms390, ms340, ms360, ms380, ms381, ms440, ms640
Click to expand...

Guess the big boys are not on there..
Click to expand...

I know I'm just a wanna be.. See the tear falling???

Someday when the time is right I will have one of the big boys!!

Hey on another note my boss has a yellow john deer chainsaw in the corner... I want it so bad.. They tell me it does not run good so the tried a new plug... I looked at it and said nothing... It has 2 plugs!!! I am gonna try and buy it...
Click to expand...

Two pistons or just or just 2 plugs?
 
I can't remember what it was for the life of me but I think a dual cylinder chainsaw came to one of my GTGs.
 
wkpoor said:
I can't remember what it was for the life of me but I think a dual cylinder chainsaw came to one of my GTGs.
Click to expand...

It's at the top of my "most wanted but the wife won't let me have it" list. It's an Echo 610EVL, aka the "Evil Twin". Google it. It is indeed a "boxer twin" style. Very smooth running but nothing special on raw power. I think Deere had a version too but dunno the exact model #.
 
MasterMech said:
wkpoor said:
I can't remember what it was for the life of me but I think a dual cylinder chainsaw came to one of my GTGs.
Click to expand...

It's at the top of my "most wanted but the wife won't let me have it" list. It's an Echo 610EVL, aka the "Evil Twin". Google it. It is indeed a "boxer twin" style. Very smooth running but nothing special on raw power. I think Deere had a version too but dunno the exact model #.
Click to expand...
More than likely Deere's model is just a rebadged Echo. I haven't googled that, but sounds cool.
 
Danno77 said:
MasterMech said:
wkpoor said:
I can't remember what it was for the life of me but I think a dual cylinder chainsaw came to one of my GTGs.
Click to expand...

It's at the top of my "most wanted but the wife won't let me have it" list. It's an Echo 610EVL, aka the "Evil Twin". Google it. It is indeed a "boxer twin" style. Very smooth running but nothing special on raw power. I think Deere had a version too but dunno the exact model #.
Click to expand...
More than likely Deere's model is just a rebadged Echo. I haven't googled that, but sounds cool.
Click to expand...

I wanna say 55EV but that just doesn't make sense. Old fellow I know has one but he wants a fortune for it with a bad crank. (Parts still avail, but pricey)

EDIT: Little bit of research say the 66SV = CST610EVL
 
southbound said:
66 sv it is

he also has a 55 ev

and a old mac that i have no idea of a model..
Click to expand...

Bet that would be an easy coil swap....lol
 
Hey anyone got a good 064 crankcase they want to sell????

Started this with a crankcase with a crank a muffler and a flywheel.. The crank was bad and replaced just to find out the case is bad also.....

When I get done with this one I will have bought every piece but the muffler and flywheel.. Well I am thinking of getting replacements for them as well just so I can say I built this from parts off the bay!!!

edit: I did grab a coil off one of my 034's... I'll replace that too!!!
 
southbound said:
Hey anyone got a good 064 crankcase they want to sell????

Started this with a crankcase with a crank a muffler and a flywheel.. The crank was bad and replaced just to find out the case is bad also.....

When I get done with this one I will have bought every piece but the muffler and flywheel.. Well I am thinking of getting replacements for them as well just so I can say I built this from parts off the bay!!!
Click to expand...
This CAD is makin you whacky, man. Next thing you know, you'll be building a 30 year old saw out of NOS parts, just so you can have a brand new 0XX...
 
Danno77 said:
southbound said:
Hey anyone got a good 064 crankcase they want to sell????

Started this with a crankcase with a crank a muffler and a flywheel.. The crank was bad and replaced just to find out the case is bad also.....

When I get done with this one I will have bought every piece but the muffler and flywheel.. Well I am thinking of getting replacements for them as well just so I can say I built this from parts off the bay!!!
Click to expand...
This CAD is makin you whacky, man. Next thing you know, you'll be building a 30 year old saw out of NOS parts, just so you can have a brand new 0XX...
Click to expand...

that is one heck of an idea!!!!!

well see I'm on the road a lot and while the rest of them are wasting their pay at the girlie bars I got a laptop and waste my doh on saw parts... Messing with the bay buying one part at a time takes up a bunch of time spent in a crappy motel...

and yes i do realize i would rather mess with saws then the ladies.. been married for 9 years ain't gonna mess it up now....
 
There definitely is some truth to that "idle hands" saying. That's for sure.
 
Ok so I had to get a new case cause a bearing spun the insert..

New case with new bearings and a few other parts ready to go...
 

Attachments

  • DSC04802 (Medium).jpg
    DSC04802 (Medium).jpg
    98.1 KB · Views: 278
  • DSC04798 (Medium).jpg
    DSC04798 (Medium).jpg
    96 KB · Views: 287
Status
Not open for further replies.
Top Bottom
Back