Almost finished with my hearth upgrade

Post in 'The Inglenook' started by Ridgefire, Feb 7, 2008.

Thread Status:
Not open for further replies.
  1. Ridgefire

    Ridgefire
    Expand Collapse
    New Member

    Joined:
    Dec 16, 2007
    Messages:
    49
    Likes Received:
    0
    First I pulled the paneling off the wall then I built a 2x6 frame. As you can see there is a plug in the middle of the wall so I had to move it.
    [​IMG]

    [​IMG]

    I wrapped it with cement board. As you can see I moved the plug to the side and ran a new plug for the stove in the floor.

    [​IMG]

    I then applied the tiles my wife picked out.

    [​IMG]

    I then applied cultured stone up the wall. My father came over and assisted me with moving the stove

    [​IMG]

    [​IMG]

    [​IMG]


    That's my little Englander 25 PDVC pellet stove


    All I have left to do is finish pulling the paneling off and paint the walls.
     

    Helpful Sponsor Ads!





  2. raybonz

    raybonz
    Expand Collapse
    Minister of Fire

    Joined:
    Feb 5, 2008
    Messages:
    6,211
    Likes Received:
    1,036
    Loc:
    Carver, MA.
    Lookin' good Ridge!
     
    Collapse Signature Expand Signature
Thread Status:
Not open for further replies.

Share This Page

Entire Site copyright © 1995-2016 - email to webinfo@hearth.com
Hearth.com and HearthNet are property and trademarks of Hearth.com LLC Advertising Information