1. Welcome Hearth.com Guests and Visitors - Please enjoy our forums!
    Hearth.com GOLD Sponsors who help bring the site content to you:
    Hearthstone Soapstone and Cast-Iron stoves( Wood, Gas or Pellet Stoves and Inserts)
    Caluwe - Passion for Fire and Water ( Pellet and Wood Hydronic and Space Heating)

Another Screw Type Splitter

Post in 'The Gear' started by Mr A, Oct 26, 2012.

  1. Mr A

    Mr A Minister of Fire

    Joined:
    Nov 18, 2011
    Messages:
    597
    Loc:
    N. California
    I used a Stickler for a while, due to cost of hydraulic. I found a great deal on a 27 ton hydraulic, so the Stickler went back on Ebay, sold in a few days for $150. At least the Stickler was directly driven by the wheel hub, up off the ground and easy to move around at 30 pounds. I wouldn't even consider using this thing. If a log sticks, you're going to burn rubber, probably gain traction and off goes your vehicle to crash into something. For laughs-
    http://www.ebay.com/itm/Cone-Log-Sp...929&pid=100010&prg=1065&rk=4&sd=390466995697&

    Helpful Sponsor Ads!





  2. swagler85

    swagler85 Minister of Fire

    Joined:
    Mar 4, 2012
    Messages:
    1,195
    Loc:
    NE Ohio
    Wow that is quite a contraption
  3. n6crv

    n6crv Feeling the Heat

    Joined:
    Aug 5, 2007
    Messages:
    332
    Loc:
    Hillsdale Co. Michigan
    If it gets stuck just shift into reverse real fast.
    swagler85 likes this.
  4. Flatbedford

    Flatbedford Minister of Fire

    Joined:
    Mar 17, 2009
    Messages:
    5,219
    Loc:
    Croton-on-Hudson, suburbs of NYC
    He doesn't even want the buyer to sign a waiver.
  5. Highbeam

    Highbeam Minister of Fire

    Joined:
    Dec 28, 2006
    Messages:
    8,878
    Loc:
    base of Mt. Rainier on the wet side, WA
    I am not having luck selling my pto splitter perhaps due ot the waiver issue. Will have to repost it and be a little sneakier. Maybe not even mention it until the deal is happening.
  6. swagler85

    swagler85 Minister of Fire

    Joined:
    Mar 4, 2012
    Messages:
    1,195
    Loc:
    NE Ohio
    Thats a good idea, I did the same when selling a handgun recently. The buyer was more than happy to sign and even offered me a look at his ID prior to me asking for a look. We just wrote up a simple disclaimer and made a copy for each of us.
  7. MasterMech

    MasterMech Guest

Share This Page