Cleaning a tall chimney

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
  • Super Cedar firestarters 30% discount Use code Hearth2024 Click here
Status
Not open for further replies.

PaulF

Member
Hearth Supporter
Nov 19, 2005
30
I have cleaned a round metal chimney flue that was only about 16 feet tall. I used a brush and fiberglass rods.

In a new location, I need to clean a couple of masonry flues in a brick chimney that is about 35 feet high. The previous owner used fiberglass poles attached to a brush. I was wondering if it might be easier to clean the tall flues with a rope attached to the brush and weight attached to the bottom of the brush. I see they make pull rings to allow rope attachment. I want to work only from the top. Is this a feasible idea? If so, how much weight is usually required? I will be using a 7x7 square brush.

PaulF
 
On my 30 and 35 foot 12 X 7 flues I had thought Rutland was BSing about a minimum 20 pound weight with a rope. They weren't. I tried several weights and ended up at 20 pounds for it to work well with a new brush.

Be sure you attach a rope to the bottom of the brush too in case it gets stuck and won't pull back up. Sometimes you can get the weight jammed in something instead of the brush and need to pull from below. When you do, stay out of the way. 20 pounds on the head or in the face has just gotta hurt.
 
Status
Not open for further replies.