cutting wood, log holder needed

[perry]

what kind of setup do you guys use to hold your logs when cutting. i am looking for a decent setup that i can put a log in and cut away at it. tierd of cutting at ground level.

this saw horse setup does'nt look to bad.
http://www.metacafe.com/watch/1123205/chainsaw_massacre_death_to_wood/

 

[colebrookman]

http://www.baileysonline.com/category.asp?CatID=246 Check out their Timberjack. That's what I use. Saw horses means more lifting and wth wood that gets old fast. Tractor with bucket and chains works even better. Just one man's way.

 

[Jags]

I think you may be looking for a saw buck. A simple design can be found here

https://www.hearth.com/econtent/index.php/forums/viewthread/4911/

 

[kevin j]

farm show paper just had a pic of one sold by Stihl in Germany. It was a metal angle iron frame with v notch ln the left side. abotu a foot outside of that there was another V shaped thing upside down over the top. The log stuck in like this crude sketch. Cantilevered out in space to cut if off. Appeared more for 6 inch or smaller, and maybe 6 ft long. Might be good for a hand saw where handling is a few seconds, then a lot of hand cutting, but seemed like a lot of handling when using a power saw when cutting is just a few sec onds.


V cut here
----------------------
^