Fisher mamabear stove installation issues

agunnoe Posted By agunnoe, Dec 27, 2012 at 6:24 PM

  1. agunnoe

    agunnoe
    New Member 2.
    NULL
    

    Dec 27, 2012
    1
    0
    Howdy ya'll
    I'm trying to install a Fisher Mamabear stove into the fireplace of the house that I am currently renting and I ran into an issue: the fireplace is a bit too small for the stove. The fireplace is about the same height as the stove exhaust pipe, which doesnt give me enough room to run the pipe straight out, then up with an elbow. Is it possible to rig something so that it can drop down before curving back up? Or am I just screwed?

    Thanks!
    Andrew
     
  2. BrotherBart

    BrotherBart
    Hearth.com LLC Mid-Atlantic Division 2.
    NULL
    
    Staff Member

    Nov 18, 2005
    32,536
    9,713
    Loc:
    Northern Virginia
    I think you are screwed. You do not want a drop in that pipe run. Hit us with a picture of the fireplace with the stove sitting in front of it if you already have it sitting there.

    And what are you planning on using as a liner for that chimney?
     

Share This Page