Friendly reminder - clean your dirty low limit snap disc for optimum convection blower performance

[Don2222]

Hello

When the snap disc senses the exhaust temp of usually 120 deg F on most stoves or 110 Deg F on AES Magnum and Country Flame stoves the convection / room blower turns on. If the disc is an airstream mount then Not if it is real dirty from exhaust ash!

See before and after clean pics below, click to enlarge:

 

[Tonyray]

Hello

When the snap disc senses the exhaust temp of usually 120 deg F on most stoves or 110 Deg F on AES Magnum and Country Flame stoves the convection / room blower turns on. Not if it is real dirty!

See before and after clean pics below, click to enlarge:

does this relate to a Harman?

 

[Don2222]

does this relate to a Harman?

No, Harman and Englander do not use snap discs.

If you have a Harman then you should clean your ESP probe!
This probe in the exhaust pipe senses the exhaust temp and turns the convection blower on at 93 Degs F

See dirty and clean ESP below:
Click pic to Enlarge

 

[Tonyray]

No, Harman and Englander do not use snap discs.

If you have a Harman then you should clean your ESP probe!
This probe in the exhaust pipe senses the exhaust temp and turns the convection blower on at 93 Degs F

See dirty and clean ESP below:
Click pic to Enlarge

what do u clean it with and is it hard to remove?