Recently picked up a Phoenix I #8611 on Craigslist for $400. It had 3 secondary air tubes in it. It's missing the middle and front secondary air tube. Rear tube is still there. Looks like the nuts fell/burnt off and the owner must have thrown the tubes away.
I'd like to fabricate the pipes. New parts are expensive and I have plenty of stainless pipe lying around. Rear and Front are identical part numbers so that's not a problem.
The center/middle tube (part #5600-034B) is the problem since it's missing. I have nothing to use as a pattern. Parts diagram shows that the middle tube is smaller in diameter than the other two, but the diagram isn't much help.
Wondering if someone has a good photo or can give me some measurements/dimensions on the center tube?
I'd like to fabricate the pipes. New parts are expensive and I have plenty of stainless pipe lying around. Rear and Front are identical part numbers so that's not a problem.
The center/middle tube (part #5600-034B) is the problem since it's missing. I have nothing to use as a pattern. Parts diagram shows that the middle tube is smaller in diameter than the other two, but the diagram isn't much help.
Wondering if someone has a good photo or can give me some measurements/dimensions on the center tube?