1. Welcome Hearth.com Guests and Visitors - Please enjoy our forums!
    Hearth.com GOLD Sponsors who help bring the site content to you:
    Hearthstone Soapstone and Cast-Iron stoves( Wood, Gas or Pellet Stoves and Inserts)

Husky chainsaw question

Post in 'The Gear' started by backpack09, Aug 11, 2008.

Thread Status:
Not open for further replies.
  1. backpack09

    backpack09 Minister of Fire

    Joined:
    Sep 10, 2007
    Messages:
    554
    Loc:
    Rochester, Mass
    The baffle on my muffler made its way off while cutting over the weekend. For the life of me I could not find the nut that held it on. I dug through my bolt buckets and found a nut that fits, but it closes off the exhaust ports. Is there a washer that goes behind the baffle? How much clearance do I need between the baffle and the muffler?

    Thanks,
    Dan

    Helpful Sponsor Ads!





  2. Jack33

    Jack33 New Member

    Joined:
    Nov 21, 2007
    Messages:
    91
    Loc:
    New Hampshire
    Check your PM.
  3. backpack09

    backpack09 Minister of Fire

    Joined:
    Sep 10, 2007
    Messages:
    554
    Loc:
    Rochester, Mass
    Thanks, but that didn't show the same muffler that my saw has.

    I fixed it by just throwing a flat washer behind the baffle and bolting it back on. It seems to run just fine.
Thread Status:
Not open for further replies.

Share This Page