Installing Hearth Pad for pellet stove

sorka Posted By sorka, Dec 22, 2007 at 2:41 AM

Thread Status:
Not open for further replies.
  1. sorka

    sorka
    New Member

    Dec 13, 2007
    35
    0
    Loc:
    Merced, CA
    I picked it up this morning. It weighs 160 lbs. Much much more than I was expecting. The classic edge perimeter is solid cast aluminum. The Mica tile is outstanding. The cost was $350 delivered.

    Here it is being rollled in on a dolly. Didn't want to risk damage to the hardwood floor, so I used two towls alternating for a continuous path.

    View attachment 234730661-L.jpg

    View attachment 234731698-L.jpg

    All the cardboard packaging removed.

    View attachment 234731598-L.jpg

    Preparing some Floor Muffler to add to the backside to prevent scratching wood floor while sliding pad the final few inches into the corner.

    View attachment 234731478-L.jpg

    Here it is with Floor Muffler on the backside.
    View attachment 234731373-L.jpg

    View attachment 234731247-L.jpg

    Finally done!

    View attachment 234731145-L.jpg

    View attachment 234731031-L.jpg

    View attachment 234730720-L.jpg

    Notice the shape of the room...same as the pad :)

    View attachment 234730833-L.jpg
     
  2. begreen

    begreen
    Mooderator
    Staff Member

    Nov 18, 2005
    60,988
    7,741
    Loc:
    South Puget Sound, WA
    What's going on the pad?
     
  3. sorka

    sorka
    New Member

    Dec 13, 2007
    35
    0
    Loc:
    Merced, CA
Thread Status:
Not open for further replies.

Share This Page