1. Welcome Hearth.com Guests and Visitors - Please enjoy our forums!
    Hearth.com GOLD Sponsors who help bring the site content to you:
    Hearthstone Soapstone and Cast-Iron stoves( Wood, Gas or Pellet Stoves and Inserts)
    Caluwe - Passion for Fire and Water ( Pellet and Wood Hydronic and Space Heating)

IS $10 to much for a pack of 6 liberty roll pins

Post in 'The Hearth Room - Wood Stoves and Fireplaces' started by lopiliberty, Dec 4, 2012.

  1. lopiliberty

    lopiliberty Minister of Fire

    Joined:
    Oct 7, 2011
    Messages:
    805
    Loc:
    Mineral County, WV
    Emailed my dealer this morning and just got the response the pins are in stock and cost $10 for 6. With my dealers reputation I would have thought that what it was going to cost for one. Wonderfull dealer and has been for the past 19 years I have dealt with them but they are know to be a little on the high side. I rather have extras in case the one that was worked itself out some decides to fall out completely

    Helpful Sponsor Ads!





  2. daveswoodhauler

    daveswoodhauler Minister of Fire

    Joined:
    May 20, 2008
    Messages:
    1,847
    Loc:
    Massachusetts
    Had the same issue on my Lopi, and I headed down to Lowes and picked up 6 or so for a couple bucks. (They are a little longer than the originals, but I'll be dammed if I am going to have to drive an hour to the dealer for a few overpriced roll pins)
  3. Jags

    Jags Moderate Moderator Staff Member

    Joined:
    Aug 2, 2006
    Messages:
    14,872
    Loc:
    Northern IL
    What are these roll pins used for in the Lopi?
  4. BrotherBart

    BrotherBart Hearth.com LLC Mid-Atlantic Division Staff Member

    Joined:
    Nov 18, 2005
    Messages:
    27,959
    Loc:
    Northern Virginia
    They hold the secondary air tubes in place.
  5. begreen

    begreen Mooderator Staff Member

    Joined:
    Nov 18, 2005
    Messages:
    46,958
    Loc:
    South Puget Sound, WA
    Check your local hardware store for the equivalent size pins. I'm guessing under 50 cents apiece.
  6. Jags

    Jags Moderate Moderator Staff Member

    Joined:
    Aug 2, 2006
    Messages:
    14,872
    Loc:
    Northern IL
    Roll pins being the hardened steel that they are will probably be pretty universal. I agree, go down to your local hardware store.
    (thanks for the application BroB)

Share This Page