Jotul 602 Inside burn plate and air baffle arrangement needed

Post in 'The Hearth Room - Wood Stoves and Fireplaces' started by Jonsered, Aug 9, 2010.

Thread Status:
Not open for further replies.
  1. Jonsered

    Jonsered
    Expand Collapse
    Member

    Joined:
    Feb 7, 2010
    Messages:
    119
    Likes Received:
    0
    Loc:
    Woodstock CT
    I thought I created a thread yesterday but I cannot find it. I recently purchased a used Jotul 602 and the burn plates and baffle were in a separate box so I think I have them setup the way they are supposed to go but I wanted a picture and/or diagram demonstrating the correct arrangement so I can confirm.

    Thanks,

    Nate
     
    Collapse Signature Expand Signature

    Helpful Sponsor Ads!





  2. begreen

    begreen
    Expand Collapse
    Mooderator
    Staff Member

    Joined:
    Nov 18, 2005
    Messages:
    60,694
    Likes Received:
    7,681
    Loc:
    South Puget Sound, WA
    Here ya go. Our baffles are more like part 5A.
     

    Attached Files:

    Collapse Signature Expand Signature
  3. Jonsered

    Jonsered
    Expand Collapse
    Member

    Joined:
    Feb 7, 2010
    Messages:
    119
    Likes Received:
    0
    Loc:
    Woodstock CT
    OK...so the square end of the burn plate goes out towards the door of the stove and they hang on the two pegs closer to the door rather than the two pegs closer to the rear of the stove...
     
    Collapse Signature Expand Signature
Thread Status:
Not open for further replies.

Share This Page