moisture meters

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
  • Super Cedar firestarters 30% discount Use code Hearth2024 Click here
Status
Not open for further replies.

rmcfall

Feeling the Heat
Hearth Supporter
Nov 28, 2005
308
Can anyone recommend a moisture meter that can be purchased on-line?
 
My cheapo twenty buck one from Harbor Freight seems to be doing fine. Just don't stick the pins a quarter inch into the end of a split and think that you have an accurate reading. Drill a couple of small holes in the middle of the split and stick them with the meter.
 
I have the same one, it works ok with pine, i havent tried it on anything else. The price is right.
 
Check out E-bay. I bought one for $20.
 
bb and msg, are you both still happy with your moisture meters? i am thinking of getting one, but i'm just a little leery of most stuff that comes from harbor freight.
thanks bruce
 
bruce56bb said:
bb and msg, are you both still happy with your moisture meters? i am thinking of getting one, but i'm just a little leery of most stuff that comes from harbor freight.
thanks bruce

Mine works great. Still reads the same as the high buck one my wood working neighbor has. I hate Harbor Freight. The manager grins from ear to ear when I walk in and brings me a basket.
 
is there a way to test a harbor freight moisture meter? I don't mean crack it open and do a calibration, but how do you know if the readings are accurate?

I'd like to use one on my girlfriend's cooking. I'd swear she has cooked things completely dry, but she swears she hasn't.

Oh yeah, those pins don't look like they go too far down....?
 
wahoowad said:
is there a way to test a harbor freight moisture meter? I don't mean crack it open and do a calibration, but how do you know if the readings are accurate?

I'd like to use one on my girlfriend's cooking. I'd swear she has cooked things completely dry, but she swears she hasn't.
LMAO :lol:
 
bump - someone mentioned drilling holes to check mositure levels deeper in the wood. Yet I see most basic moisture meters like the harbor freight one have two short prongs....?
 
wahoowad said:
bump - someone mentioned drilling holes to check mositure levels deeper in the wood. Yet I see most basic moisture meters like the harbor freight one have two short prongs....?

I drill the holes. The reason for the holes is that hardwood is just that. Hard wood. In order to get the prongs deep in the wood ya would have to smack the end of the meter pretty hard and that would pretty much demolish the meter.

For five or six hundred dollars you can get a pro meter that is made to be driven into the wood but for the difference I like my cordless drill just fine.
 
bb, i took your advice and ordered one from harbor freight. now, question.....
should i take a split and split it again and then drill the hole for the probes? or should i just drill the holes for the probes?
thanks bruce
 
bruce56bb said:
bb, i took your advice and ordered one from harbor freight. now, question.....
should i take a split and split it again and then drill the hole for the probes? or should i just drill the holes for the probes?
thanks bruce

I just drill the holes for the probes. On most splits that gets close enough to the center. If you split it again just test it in the center without the holes.
 
BB hit the point I was going to make. If you are really interested in what the center is like, split it again, and take the reading right away.
 
Hey BB, I made my first sojourn to Harbor Freight yesterday and dropped a C note! I didn't realize there was a Harbor Freight around here. Had to drive a bit, though. It was a much smaller store than I expected.

Wood moisture meter, laser thermometer, Kill-a-Watt, bulk pack of cheap gloves for stacking, 1 pair $7 gloves for splitting/sawing, and hmmmm... forget what else. Used my 15% off coupon and saved $6 on the thermo, not bad.

I kinda felt like I was feeding starving kids in China. They should call that place China Freight.

Moisture meter seems to work ok, but I'm still suspicious. I tried both the newly split technique and the drill technique. Will use it more before final judgement. This is pretty fresh red and white oak I'm testing, but the meter only shows 27% except on one occasion when it topped out at 35%, the next and last graduation on the 'high' scale. I guess that could be correct, but seems like it should have pegged the meter for such fresh wood. What do you think?

Laser thermometer seems like it is about 3 - 10 degrees off (depending on what I'm checking), but that should be acceptable for stove use I'd think. It also seems to raise a few degrees on the same things after I've held and used it for about 5 or 10 or uh, 30 minutes. That nine volt battery is holding up pretty well. ;) Looks like I need some insulation in my dormer. Interesting info all over the house. I think this thing will come in handy. How long before the novelty wears off? ;)

Haven't tried the kill-a-watt device yet. The beer fridge is first on the list of experiments. May need to justify a keg setup to Mrs. Mo Heat. ;)
 
Don't know what's happening Mo. My moisture meter pegs on new oak splits and the thermo tracks with the stove thermometer and the one in the room so close it is kinda scary.

Yep, Harbor and the computer makers are giving us a grand opportunity to feed most of China.
 
Status
Not open for further replies.