old country flame flue

Post in 'The Hearth Room - Wood Stoves and Fireplaces' started by nfsus, Nov 6, 2010.

Thread Status:
Not open for further replies.
  1. nfsus

    nfsus
    Expand Collapse
    New Member

    Joined:
    Oct 4, 2009
    Messages:
    2
    Likes Received:
    0
    Loc:
    arkansas
    we bought an old country flame last year and it is wonderful! Now for the bad. I can not find a flue adapter for the stove that will fit. 8" snap pipe will fit around the flue collar on top of the stove, but then all the creosote runs out on top of the stove. We need an adapter to go inside of the flue collar that will fit the crimped end of the 8" pipe on top so it will run inside into the stove not outside and stink,smoke,make wife mad and on and on. any ideas? The ID is 7 3/4" or so.
     

    Helpful Sponsor Ads!





  2. Wood Heat Stoves

    Wood Heat Stoves
    Expand Collapse
    Minister of Fire

    Joined:
    Jun 12, 2009
    Messages:
    1,903
    Likes Received:
    13
    Loc:
    Nevada City, California
    recrimp the pipe
    take it to a sheet metal shop ands have them super crimp it if needed
     
Thread Status:
Not open for further replies.

Share This Page

Entire Site copyright © 1995-2016 - email to webinfo@hearth.com
Hearth.com and HearthNet are property and trademarks of Hearth.com LLC Advertising Information