Pellets Accumulating in Fireport

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
  • Super Cedar firestarters 30% discount Use code Hearth2024 Click here
Status
Not open for further replies.

garys314

Member
Hearth Supporter
Oct 10, 2007
39
I have a ten year old Whitfield Pellet Insert. The pellets are accumulating and ultimately overflowing the fire pot. This has never happened before. I had a professional service the stove three weeks ago. I changed the brand of pellets and still have the same problem. I also have a free standing quadra fire and not having the same problem, so it is probably not the pellets.

Any thoughts would be appreciated.

Gary
 
garys314 said:
I have a ten year old Whitfield Pellet Insert. The pellets are accumulating and ultimately overflowing the fire pot. This has never happened before. I had a professional service the stove three weeks ago. I changed the brand of pellets and still have the same problem. I also have a free standing quadra fire and not having the same problem, so it is probably not the pellets.

Any thoughts would be appreciated.

Gary
DID IT DO IT BEFORE THE SERVICE?

The did the tech Take the whole stove apart?
Both blowers and pull the firebrick and damper behind the firebrick to clean.


Pellet NOT BURNING and pile up is a combustion problem.
Check your air adjustment

You are not getting enough air in or out of the stove
Check for air leaks in the ash pan and main door
Check to see if the flue is clear and the cap is clean.


See more cleaning tips on my website http://www.hearthtools.com/parts/Whit_parts.htm
 
Thanks for taking the time to post a reply. I changed the combustion and it does seem to help. I will have to see how it goes for the next couple of days. How can you tell if the combustion is set right? How high and what color should the flame be?

thanks in advance,

gary
 
Thanks again for your help. This forum rocks. Keep up the good work.


Gary
 
Status
Not open for further replies.