1. Welcome Hearth.com Guests and Visitors - Please enjoy our forums!
    Hearth.com GOLD Sponsors who help bring the site content to you:
    Hearthstone Soapstone and Cast-Iron stoves( Wood, Gas or Pellet Stoves and Inserts)

Quadrafire pellet stove insert

Post in 'The Pellet Mill - Pellet and Multifuel Stoves' started by lindabopeep12, Nov 21, 2012.

  1. lindabopeep12

    lindabopeep12 New Member

    Nov 21, 2012
    I have a problem with my pellet stove. It starts up and pellets feed the fire until the blower starts then it stops feeding pellets. I pulled it out last week and cleaned it all out. It worked for a couple days then it started doing this. I hit the reset and it comes on and acts right until the blower comes on then it stops feeding pellets. Anyone know why?

    Helpful Sponsor Ads!

  2. DexterDay

    DexterDay Guest

    Is your thermocouple set right?

    What stove do you have exactly?

    The thermocouple should be touching the inside of the ceramic cover and the ceramic cover should be sticking out into the pot about an inch

    Sounds like the T/C isnt seeing the High temp in time. IMO

Share This Page