Rebuilding the Gearbox for Whitfield Pellet Stoves

Post in 'The Pellet Mill - Pellet and Multifuel Stoves' started by susb8383, Nov 4, 2009.

Thread Status:
Not open for further replies.
  1. susb8383

    susb8383
    Expand Collapse
    Member

    Joined:
    Oct 24, 2009
    Messages:
    79
    Likes Received:
    0
    Loc:
    Framingham MA
    Hi,

    We recently fixed our problem with the auger not turning after trying a lot of different things, one of which was to take apart the gear box. It turns out the problem was worn teeth on one of the gears, so we ordered a new motor/gear box.

    It works great and we have heat again.

    When I took apart my gear box, I made careful notes so that I could put it back together. So I thought I would post my instructions here in case it would be helpful to someone in the future.

    I documented everything on my blog:
    [url "http://www.athingortwo.info/misc/rebuilding-the-gear-box-for-a-whitfield-advantage-pellet-stove.html"]Reassembling a Whitfield Pellet Stove Gearbox[/url]

    --Susie
     

    Helpful Sponsor Ads!





Thread Status:
Not open for further replies.

Share This Page