Resolute Acclaim gasket sizes?

PaulF Posted By PaulF, Dec 2, 2005 at 2:36 PM

Thread Status:
Not open for further replies.
  1. PaulF

    PaulF
    Member 2.
    NULL
    

    Nov 19, 2005
    25
    0
    I have a Vermont Castings Resolute Acclaim model 2490 needing gasket replacements.
    I have some new gaskets from a Encore model that I no longer own. I think I can use some of the gaskets from the Encore kit.

    Does anyone have a list of gasket material provided (diameter and lengths) in a complete kit for replacing gaskets in the Resolute Acclaim?

    PaulF
     
  2. elkimmeg

    elkimmeg
    Guest 2.
    NULL
    

    most of the common ones like doors are the same
     
  3. Shane

    Shane
    Minister of Fire 2.
    NULL
    

    Nov 21, 2005
    1,831
    3
    Loc:
    Casper Wyoming
    Resolute Acclaim Gaskets on Moving Parts
    Gasket Size... ...And The Parts It Seals
    3/16" The glass to the load door frame
    5/16" wire mesh The griddle to the stove top
    1/2" The arch and bottom edge of the
    innerfront stove panel to the front
    load door
    1/2" The front of the grate to the front
    load door

    5/16” The griddle to the stove top
    (wire reinforced gasket)
    3/8” The ash door to the front of
    the ash drop
    3/16” The outer glass panes to the
    doors
    5/16” The damper to the
    upper fireback; the front doors
    to the stove front; and the
    doors to each other.
     
Thread Status:
Not open for further replies.

Share This Page