so i was doing my first full cleaning and went to ram the cleaner down the exhaust behind the ash bin of my harman p61a and it stops. i look down the tube with a flashlight and see a piece of metal. i take the adapter off the back and stick my hand in it and feel the metal. i take the adapter off at the cleanout and look inside. here there's a single screw that gets put into the exhaust tin and into the cast adapter. the self tapping screw didn't pierce the internal sleeve all the way and instead pushed it about 3/4" away from the adapter and created a cup where tons of ash is packed.
think the installer should replace for free? it looks like the internal sleeve is fixed to the adapter permanently. I"m going out tomorrow to find out.
think the installer should replace for free? it looks like the internal sleeve is fixed to the adapter permanently. I"m going out tomorrow to find out.