just started my p43 on room temp. Didn't seem to be heating the whole house so later changed to constant burn. Got so hot in here had to shut it down. No ability to adjust temp. Used a lot of pellets. In nh. 1200sq ft home one level. Any suggestions?
Room temp/constant burn
- Thread starter Needhelpnow
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
- Status
Stove temp will constantly burn and feed pellets, you can adjust the feed rate down to lower number.
Room temp will adjust based on the temp probe, maybe try moving your probe away from stove or you'll have to adjust the temperature knob accordingly.
Another thing to do is change blower speed. High fan speed will burn more pellets so not a bad idea on warmer days to set lower.
Room temp will adjust based on the temp probe, maybe try moving your probe away from stove or you'll have to adjust the temperature knob accordingly.
Another thing to do is change blower speed. High fan speed will burn more pellets so not a bad idea on warmer days to set lower.
- Status
Similar threads
